Fujifilm instax mini Film - Soft Lavender - 10 Shots

This film is compatible with all Fujifilm instax mini series cameras and instax mini Link smartphone printers. It will not work with instax SQUARE or instax WIDE models.

Each pack of Fujifilm instax mini Film - Soft Lavender contains 10 exposures.

Photos typically begin to appear within 15-30 seconds and fully develop within 90 seconds to a few minutes, depending on the ambient temperature.

Store unopened film packs in a cool, dry place, away from direct sunlight and extreme temperatures. For prolonged storage, refrigeration is acceptable, but allow it to return to room temperature before use.

Yes, the high-speed ISO 800 film is suitable for various lighting conditions, including bright sunlight. However, be mindful of harsh shadows and potential glare.

The primary difference is the unique Soft Lavender colored border surrounding each photo, which adds a distinct aesthetic touch compared to the standard white borders. The film's chemical properties and image quality remain consistent with other instax mini films.

Check if the dark slide was properly ejected. Ensure the film cartridge is correctly inserted. If using a camera, verify the flash fired or if the environment was too dark for the camera's light meter settings.

This often indicates the camera lens cap was on (if applicable) or the exposure was severely underexposed (too dark). Check your camera's exposure settings or ensure adequate lighting.

Film might be expired or stored in adverse conditions (too hot/cold, direct sunlight). Ensure optimal ambient temperature during development. Avoid bending the film during development.

Check if the film cartridge is fully seated and properly aligned. Ensure there are still exposures left in the pack (check counter). If using a camera, verify batteries are charged.

This could be dust or debris inside the camera's film slot or on the rollers. Carefully inspect and clean the film ejection slot and rollers according to your camera's manual.