Best current price£8.71from eBay
Shopping.co.uk recommended and popular offers
eBay£8.71Visit shop Power Can Gloss Black Topcoat Aero Colour for Cars, Vans, Motorhomes, Industrial
Visit shop
B&Q£10.69Visit shop B&Q - U-Pol Powercan Silver Steel Wheel Paint 500Ml Metallic Coating Car
Visit shop13 offers from £8.71 - £12.00
View price history by clicking the chart icon.
The U-POL Power Can Steel Silver Metallic Coating Aerosol is an ideal solution for DIY enthusiasts and professionals seeking a high-quality, durable, and easy-to-apply metallic finish on primed or metal surfaces, particularly for automotive applications. Its ready-to-use formulation and rapid 30-minute dry time offer efficiency and convenience, though achieving optimal results requires careful surface preparation.
| Model Part Number | PCSS/AL |
|---|---|
| Brand | U-POL |
This U-POL Power Can is specifically designed for use on primed or metal surfaces. It's ideal for automotive components, industrial parts, and various other metal items requiring a durable metallic finish.
While it can be applied directly to properly prepared metal surfaces, using a suitable primer is highly recommended for optimal adhesion, enhanced durability, and a smoother final finish, especially on bare metal or where corrosion protection is desired.
The U-POL Power Can Steel Silver has a rapid dry time of approximately 30 minutes to the touch. However, full cure time may take longer, typically 24 hours, depending on ambient temperature and humidity.
For best results, apply multiple thin, even coats rather than one heavy coat. Typically, 2-3 coats are sufficient to achieve a uniform metallic finish and desired depth, allowing proper flash-off time between each coat.
Yes, for enhanced durability, UV protection, and a deeper gloss, you can apply a suitable automotive-grade clear coat over the U-POL Power Can Steel Silver metallic finish. Ensure the metallic paint has fully dried (usually 24 hours) before applying clear coat to avoid solvent reactions.
For optimal results, apply this aerosol paint in a well-ventilated area where the ambient temperature is between 15°C and 25°C (60°F and 77°F). Avoid applying in direct sunlight or in very cold/hot conditions.
This often occurs if the can wasn't shaken sufficiently or if the application distance was inconsistent. Ensure you shake the can vigorously for at least two minutes before and periodically during use. Apply paint in thin, even, overlapping coats, maintaining a consistent distance of approximately 15-20 cm (6-8 inches) from the surface.
Runs and drips are usually caused by applying too much paint in one coat or holding the can too close to the surface. Apply several thin coats instead of one thick coat, allowing proper flash-off time between each application. Move the can smoothly and steadily across the surface.
A clogged nozzle typically happens when the can isn't cleaned after use. After each painting session, invert the can and spray until clear propellant comes out. If already clogged, remove the nozzle and clean it with a suitable solvent or replace it with a new one.
This usually indicates inadequate surface preparation. Ensure the surface is thoroughly cleaned, degreased, and lightly sanded (scuffed) to provide a proper 'key' for the paint to adhere to. If painting bare metal, always apply a suitable primer first.
Before applying the U-POL Power Can Steel Silver, ensure your workspace is well-ventilated and that you are wearing appropriate personal protective equipment, including gloves and a respirator. Thoroughly clean the surface to be painted, removing any dirt, grease, or rust. For best results, sand the surface lightly to create a key for adhesion and then wipe it clean again with a tack cloth or degreaser. For bare metal surfaces, applying a suitable primer is highly recommended to promote adhesion and durability. Shake the aerosol can vigorously for at least two minutes after the mixing ball rattles to ensure proper mixing of the metallic pigments.
This metallic coating is designed for use on `primed or metal surfaces`. It is particularly effective for automotive parts, industrial components, and other metal items requiring a durable and attractive silver metallic finish. Ensure any primer used is compatible with an acrylic-based topcoat.
To maintain the quality of your U-POL Power Can, store it in a cool, dry place away from direct sunlight and extreme temperatures. After each use, invert the can and spray for a few seconds until only clear propellant comes out. This cleans the nozzle, preventing clogs for future applications. If the nozzle does clog, remove it and clean it with a solvent, or replace it with a new one.
