Best current price£229.99from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£229.99Visit shop Monstershop Unisex Black Pixmax 5 In 1 Combo Swing Heat Press Machine In 5In
Visit shop4 offers from £229.99
View price history by clicking the chart icon.
The PixMax 5 in 1 Swing Heat Press Machine is ideal for small business owners, crafters, and hobbyists looking to create custom merchandise. Its key advantage lies in its versatile 5-in-1 design, allowing customization of various items from t-shirts to mugs with a single device. Be aware that mastering heat press techniques for different materials requires some practice and additional sublimation supplies.
| Colour | Multicolor |
|---|---|
| Series | PixMax |
| Brand | PixMax |
This heat press is primarily designed for sublimation printing. You will need special sublimation ink and sublimation transfer paper, along with sublimation-ready blanks that are specifically coated or made of high-polyester content.
No, for best results with sublimation, you need materials that are either polyester (at least 65% for good vibrancy) or specially coated for sublimation. For heat transfer vinyl (HTV), it is compatible with cotton, polyester, and blended fabrics.
The heat-up time can vary depending on the target temperature and ambient conditions, but typically it takes around 10-15 minutes to reach working temperature from a cold start. Info needed: (Exact warm-up time specification).
The PixMax 5 in 1 Swing Heat Press can typically reach temperatures up to 250°C (482°F), which is sufficient for all standard sublimation and HTV applications. Always refer to your user manual for precise specifications.
Yes, while there is a slight learning curve to understand temperature, time, and pressure settings for different materials, the machine itself is designed for straightforward operation. We recommend starting with practice runs on scrap materials.
The main flat press platen offers a generous print area of 38cm x 30cm (approximately 15 inches x 12 inches), suitable for a wide range of flat items including t-shirts and signs.
Yes, this machine is fully capable of applying heat transfer vinyl (HTV). You will need to adjust the temperature and time settings according to the specific HTV manufacturer's recommendations.
Ensure consistent pressure across the entire platen, verify temperature and time settings are correct for your material, and pre-press items to remove moisture. Check for cold spots by using a thermometer gun if available. Ensure your sublimation paper is designed for the correct transfer type.
Increase pressure and/or dwell time. Ensure the item and transfer are secured to prevent shifting during the press. Check if the substrate is sublimation-ready and properly coated. Use heat-resistant tape to secure transfers.
Verify the power cord is securely plugged into a grounded outlet and the power switch is 'ON'. Check your circuit breaker. If the issue persists, consult the user manual for internal fuse locations or contact customer support.
Ensure the machine is cool before attempting to change attachments. Double-check that all securing pins or screws are fully loosened. Lubricate connection points with a small amount of heat-resistant lubricant if friction is an issue, ensuring not to get any on heating elements. Always follow the specific instructions in your user manual.
Lower the temperature setting or reduce the press time. Use a protective cover sheet (like Teflon or parchment paper) between the heating platen and your garment. Test on a scrap piece of fabric first.
This heat press is primarily designed for sublimation printing and heat transfer vinyl (HTV) applications. It is compatible with:
Always ensure your blank material can withstand the required temperatures and that you use appropriate sublimation inks and papers for optimal results.
