Best current price£110.96from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£110.96Visit shop Draper Tools Draper Petrol Brush Cutter And Line Trimmer 25.4Cc 30268
Visit shop
B&Q£130.00Visit shop B&Q - Petrol Brush Cutter And Line Trimmer25.4Cc
Visit shop3 offers from £110.96 - £145.41
View price history by clicking the chart icon.
The Draper 25.4cc Petrol Brush Cutter and Line Trimmer is designed for homeowners with demanding garden maintenance needs, offering a powerful 2-in-1 solution for tackling thick grass, weeds, and undergrowth. Its key benefit lies in its versatility with interchangeable cutting heads and a reliable 25.4cc engine for efficient performance. A potential caveat is the need for proper fuel mixing and maintenance inherent to petrol-powered equipment.
| Model Part Number | 25.4cc |
|---|---|
| Brand | Draper |
The recommended fuel mixture is typically a 40:1 ratio of unleaded petrol to a high-quality 2-stroke engine oil. Always refer to the product manual for the exact ratio and type of oil.
The air filter should be checked regularly, ideally after every few uses, and cleaned or replaced when visibly dirty or clogged. This is crucial for maintaining engine performance.
Yes, you can use standard trimmer lines. However, ensure the diameter of the line is compatible with the Tap ‘N’ Go spool head to avoid damage or poor performance. Using genuine Draper parts is recommended for best results.
For long-term storage, it is recommended to run the engine dry of fuel or use a fuel stabilizer. Clean the unit thoroughly and store it in a dry, protected area. For the split shaft, separate it for more compact storage.
The Tap ‘N’ Go nylon line spool has a cutting width of 440mm.
The 3-tooth metal blade should be inspected for damage before each use. It can be sharpened using a metal file to maintain its cutting efficiency. Replace the blade if it becomes significantly damaged or worn.
Yes, the shoulder harness is adjustable to ensure a comfortable and balanced fit for the user, helping to distribute the weight evenly and reduce fatigue.
Ensure the fuel tank has the correct fuel mixture. Check that the on/off switch is in the 'on' position. Verify the spark plug is correctly connected and clean. If the pull cord feels very stiff, there may be an obstruction.
Check the fuel mixture quality and ratio. Clean or replace the air filter. Ensure the spark plug is clean and properly gapped. Inspect the fuel filter for blockages.
Ensure the nylon line is correctly wound onto the spool and feeding properly. Check that the line is not too thick for the spool head. Try feeding more line using the Tap ‘N’ Go mechanism.
Ensure the cutting head (line spool or blade) is securely fastened. Check the blade or spool for damage or imbalance. If vibration persists, inspect the engine mountings.
Ensure the engine is off and cool. Locate and engage the shaft lock pin if applicable. Follow the manual's instructions for safely removing and attaching the cutting heads.
Setup: Before first use, assemble the U-shaped handle and attach your chosen cutting head (line spool or blade). Ensure the correct fuel mixture (typically 40:1 ratio of unleaded petrol to 2-stroke oil) is prepared and added to the fuel tank. Familiarize yourself with the safety instructions provided in the manual.
Compatibility: This model is designed for general garden maintenance. The nylon line spool is compatible with standard trimmer lines, and the 3-tooth blade is suitable for clearing tougher vegetation. Always use genuine Draper parts or compatible accessories to ensure optimal performance and safety.
Care: Store the brush cutter in a clean, dry place. After each use, clean the exterior, especially the cutting head and engine cooling fins. Check the nylon line spool and replace the line when depleted. For the metal blade, ensure it is sharp and free from damage; sharpen or replace as needed. Regularly check the air filter and clean or replace it as per the manufacturer’s recommendations. Store with fresh fuel or use a fuel stabilizer if storing for extended periods to prevent carburetor issues.
