Chainsaw Chain - Ryobi - 40cm
Best current price£19.99from Ryobi
Best offers
Shopping.co.uk recommended and popular offers
Ryobi£19.99Visit shop Ryobi 40Cm Chainsaw Chain For Rcs2340b (Single)
Visit shopRyobi£19.99Visit shop One Offer
1 offer from £19.99
View price history by clicking the chart icon.
Product Information
Full details
This Ryobi 40cm Chainsaw Chain (RAC253) is designed for Ryobi's RCS2340B 2300W 40cm Chainsaw, offering a direct replacement for optimal cutting performance. It ensures your chainsaw maintains its efficiency for various cutting tasks. Ensure compatibility with your specific Ryobi chainsaw model before purchase.
All features
| Model Part Number | 5132004345 |
|---|---|
| Brand | Ryobi |
Extended Product Information
FAQs
What chainsaw model is this Ryobi chain compatible with?
This Ryobi RAC253 40cm chainsaw chain is specifically designed for and compatible with the Ryobi RCS2340B 2300W 40cm Chainsaw.
How do I know when to replace the chainsaw chain?
You should consider replacing the chain when it becomes dull and difficult to sharpen effectively, if teeth are broken or bent, or if the chain shows signs of excessive stretching or wear.
What is the weight of this chainsaw chain?
The approximate weight of this Ryobi chainsaw chain is 0.440924524 pounds.
Can I use this chain on a different brand of chainsaw?
This chain is specifically designed for the Ryobi RCS2340B model. Using it on other brands or models may not be compatible and could lead to poor performance or damage.
How often should I check the chain tension?
It is recommended to check the chain tension before each use and periodically during extended cutting sessions, as chains can loosen with use, especially when new.
What is the benefit of a 40cm chain length?
The 40cm (approximately 16-inch) cutting length is standard for many medium-duty chainsaws and provides a good balance for cutting branches and logs of moderate size.
Troubleshooting
Chain is not cutting efficiently
Check if the chain is dull and requires sharpening. Also, verify the chain tension is correct; a loose chain can perform poorly.
Chain derails from the bar
Ensure the chain tension is properly adjusted. Check for any damage to the chain or guide bar, and confirm the chain is correctly seated in the bar groove.
Chain is difficult to move by hand
The chain tension is likely too tight. Loosen the bar nuts slightly and reduce the chain tension until it can be moved by hand with some resistance.
Chain appears excessively worn or damaged
Inspect the chain for broken or bent teeth, stretched sections, or excessive wear. If significant damage is present, the chain should be replaced immediately.
Pros and Cons
Pros
- Direct replacement for Ryobi RCS2340B chainsaw
- Designed for optimal cutting performance
- Durable construction for longevity
- Lightweight design for better handling
Cons
- Only compatible with specific Ryobi models
- Requires proper tensioning and maintenance for best results
- May require replacement if damaged or worn significantly
Setup, Compatibility & Care
Compatibility: This Ryobi RAC253 chainsaw chain is specifically designed for the Ryobi RCS2340B 2300W 40cm Chainsaw. Always verify your chainsaw model number before purchasing a replacement chain.
Setup:
- Ensure the chainsaw is turned off and the chain brake is engaged.
- Loosen the bar nuts on the chainsaw.
- Remove the side cover.
- Carefully remove the old chain, noting its orientation.
- Place the new chain onto the guide bar, ensuring the drive links engage correctly in the bar groove and the cutters are facing the correct direction (forward on the top of the bar).
- Reinstall the side cover and loosely tighten the bar nuts.
- Adjust chain tension using the integrated tensioning system or adjustment screw. The chain should be snug but still pullable by hand around the bar. It should not sag.
- Fully tighten the bar nuts while holding the bar tip up to maintain tension.
- Disengage the chain brake and test the chain by carefully running the saw briefly; the chain should move freely without excessive slack and stop when the brake is engaged.
Care:
- Tensioning: Regularly check and adjust chain tension. A loose chain can derail, while an overly tight chain can cause excessive wear.
- Sharpening: Keep the chain sharp using a file or a sharpening tool. Dull chains reduce cutting efficiency and increase wear.
- Cleaning: Clean the chain and guide bar after each use to remove sawdust, sap, and debris.
- Lubrication: Ensure the chainsaw's automatic oiler is functioning correctly and the oil reservoir is filled to lubricate the chain and bar during operation.