Best current price£90.21from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£90.21Visit shop Eaton Industries Eaton Installation Contactor 230Vac 50Hz 2No 2Nc 40A 3Hp - 248853
Visit shop3 offers from £90.21 - £183.41
View price history by clicking the chart icon.
This Eaton Installation Contactor is designed for electrical professionals managing power distribution in industrial settings. Its primary benefit is providing reliable remote control and efficient switching of electrical loads up to 40A. A key consideration is its specific actuation voltage range, requiring precise power supply.
| Series | Z-SCH230/40-22 |
|---|---|
| Model Part Number | 248853 |
| Brand | Eaton |
This contactor is typically used in industrial applications for remote switching of electrical loads, power distribution, and automation control where reliable relay operation is essential.
The rated control circuit voltage is 230V AC.
It is equipped with 2 normally open (N/O) and 2 normally closed (N/C) contacts.
The maximum switching current at AC1 is 40A.
Yes, it is designed for standard 35mm top-hat rails, with a mounting width of 3 SU (52.5mm).
The operational measuring voltage is 440V.
The actuation voltage ranges between 195.5V AC and 253V AC.
Verify the control circuit voltage is within the 195.5 - 253V AC range and that the supply is stable. Check wiring connections to the coil terminals for proper fit and continuity.
Confirm the load current does not exceed the 40A AC1 rating. Check the wiring of the load circuit to the main terminals and ensure they are securely connected. Inspect contacts for signs of welding or excessive wear.
Ensure the control voltage is stable and within the specified range. Loose mounting or vibration can also cause noise; ensure the contactor is securely fixed to the rail.
This indicates a failure due to overload or short circuit. The contactor will likely need replacement. Investigate the cause of the overload or short circuit in the controlled equipment.
Setup: Mount the contactor onto a standard top-hat rail (35mm) within an electrical enclosure. Ensure the control circuit voltage matches the 230V AC requirement. Wire the load circuits to the power terminals and the control circuits to the coil terminals according to the N/O and N/C contact configurations. Always disconnect power before installation or wiring.
Compatibility: The contactor is designed for use with 230V AC control circuits. Ensure the power source for the control signal falls within the actuation voltage range of 195.5 - 253V AC. It is compatible with standard industrial electrical systems adhering to IEC, EN, and VDE standards.
Care: This is a maintenance-free component under normal operating conditions. Periodically inspect the terminals for tightness and check for any physical damage. Ensure the surrounding environment is free from excessive dust, moisture, or corrosive elements that could compromise performance.
