Setup, Compatibility & Care
Setup:
- Turn off water supply: Locate the shut-off valve for your toilet's water supply and turn it clockwise until it stops.
- Flush the toilet: To drain remaining water from the tank.
- Disconnect hose: Unscrew the existing water supply hose from the bottom of the toilet tank.
- Install T-valve: Attach the included T-valve to the toilet fill valve connection. Ensure the rubber washer is in place.
- Reconnect hose: Screw the original water supply hose to the bottom outlet of the T-valve.
- Connect sprayer hose: Attach the sprayer hose to the side outlet of the T-valve. Hand-tighten, then use pliers for a quarter turn if needed. Do not overtighten.
- Mount sprayer holder: Securely attach the sprayer holder to the wall or toilet tank using the provided screws and anchors.
- Turn on water supply: Slowly turn the shut-off valve counter-clockwise.
- Test for leaks: Check all connections for any drips. Tighten slightly if necessary.
Compatibility:
This kit is designed to work with standard North American toilet water supply lines and fill valves. Ensure you have a 7/8" ball cock connection for the T-valve.
Care:
- Wipe the sprayer and hose with a soft, damp cloth. Avoid abrasive cleaners.
- Periodically check connections for leaks and tighten if needed.
- Ensure the sprayer nozzle is clean for optimal performance.