Best current price£24.11from eBay
Shopping.co.uk recommended and popular offers
eBay£24.11Visit shop John Guest 15mm 2 Way Divider Y Connector Pipe Fitting Push Fit (Pack of 2)
Visit shop
The Range£24.30Visit shop John Guest Speedfit 15Mm Two Way Divider Y Connector Pipe Fitting Push Fit (Pack Of 2) - Grey
Visit shop13 offers from £24.11 - £50.78
View price history by clicking the chart icon.
The John Guest Speedfit Two Way Divider (CM2315W) is an essential plumbing component for DIY enthusiasts and professional installers looking to split a single 15mm supply line into two equal feeds. This push-fit acetal connector offers a rapid, tool-free installation process and a reliable, leak-tight seal, making it perfect for potable water applications. While it excels in efficiency and ease of use, users should note that it is limited to a maximum temperature of 65°C, making it unsuitable for high-heat boiler outputs or steam systems.
| Model Part Number | CM2315W |
|---|---|
| Brand | John Guest Speedfit |
Yes, it is compatible with soft metal pipes, including copper, provided they are clean and free from burrs.
The fitting is designed for standard household water pressures; consult the specific technical sheet for exact bar ratings based on temperature.
Yes, the materials used are suitable for potable water and comply with water safety regulations.
Only if the water temperature does not exceed 65°C. It is generally not recommended for primary boiler circuits that run hotter.
No, the fitting comes with an integrated EPDM O-ring, and no additional sealants or tapes are necessary.
This specific package contains 3 individual 15mm two-way divider fittings.
Ensure the pipe end is cut square and is free of scratches or burrs. Push the pipe deeper into the fitting to confirm it has passed the O-ring.
Check that the collet is in the open position and ensure the pipe diameter is exactly 15mm. If using soft metal pipe, ensure it is not deformed.
Ensure the collet is pressed evenly and fully into the fitting body before pulling the pipe out. Check for any debris caught in the collet teeth.
To ensure a successful installation, cut your 15mm LLDPE or soft metal pipe cleanly and square, ensuring there are no burrs on the edges. Insert the pipe firmly into the John Guest connector until it hits the internal stop; the fitting will automatically grab and seal the pipe. If you ever need to remove the pipe, push the collet square against the fitting body and pull the pipe out. For maintenance, ensure the fitting is not exposed to harsh chemicals or temperatures exceeding 65°C. Periodically inspect the connection for signs of external damage if installed in an area subject to vibration.
