Setup, Compatibility & Care
Setup:
- Site Preparation: Dig post holes to the recommended depth (typically one-third of the post's length in the ground for 8ft posts). Ensure the base is firm and level.
- Post Installation: Place the post in the hole. Use a spirit level to ensure it is perfectly vertical.
- Securing: Backfill the hole with soil, tamping it down firmly in layers, or use post-mix concrete for maximum stability. Ensure the top of the backfilled soil/concrete is sloped away from the post to aid water runoff.
- Panel Attachment: Once the post is secure and stable, attach your chosen fence panels using appropriate brackets and screws.
Compatibility:
These posts are designed to be compatible with most standard fence panels, especially other pressure-treated or green-treated timber panels. The rough sawn finish offers good adhesion for fence panel clips or brackets.
Care:
- Inspection: Periodically inspect the base of the posts for any signs of wear or damage, although the treatment and guarantee minimize this risk.
- Cleaning: The posts can be cleaned with a stiff brush and water if they become dirty. Avoid harsh chemicals that could compromise the timber's integrity.
- Maintenance: While the anti-rot guarantee is extensive, for aesthetic purposes, you can apply a suitable timber preservative or stain if you wish to alter the colour or further protect the surface, but this is not required for structural longevity.