Best current price£6.02from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.02Visit shop Kenable Stage Ready Xlr 3Pin Microphone Lead Male To Female Mic Studio Cable Black 0.5M
Visit shop
B&Q£7.47Visit shop B&Q - Stage Ready Xlr 3Pin Microphone Lead Male To Female Mic Studio Cable Black 0.5M
Visit shop2 offers from £6.02 - £7.47
View price history by clicking the chart icon.
This professional series Kenable XLR microphone lead is designed for musicians and audio engineers seeking reliable, high-quality audio transmission for live performances and studio recording. Its key benefit is a low-noise, durable construction that preserves audio integrity. A potential caveat is its specific use case, primarily for balanced 3-pin XLR connections.
| Colour | Black |
|---|---|
| Model Part Number | 012478 |
| Brand | kenable |
The primary advantage is its professional-grade construction, offering low noise, low loss, and high durability, ensuring reliable and clean audio transmission for live and studio applications.
Yes, this cable is designed for devices with 3-pin XLR connectors, which includes most microphones, as well as active speakers and some PA system inputs.
A 95% spiral shield provides excellent protection against electromagnetic interference (EMI) and radio frequency interference (RFI), significantly reducing unwanted hum and static, thus preserving audio clarity.
The XLR connectors on this cable are made of heavy-duty brass, which is more durable and provides a better connection compared to typical zinc connectors found on cheaper cables.
The built-in strain relief protects the connection points where the cable enters the XLR plug, preventing stress and potential damage from pulling or bending, thereby increasing the cable's lifespan.
This is a balanced mono XLR cable. For stereo signals, you would typically need two of these cables (one for left, one for right) or a different type of connector like TRS or RCA, depending on the devices.
The cable features 22AWG Copper Twisted Pair Audio Cores and a 16AWG (0.12mm2) copper spiral shield.
Ensure both ends of the XLR cable are securely plugged in. Check that the microphone is powered on (if it's a condenser mic) and that the correct input channel is selected and unmuted on your mixer or interface. Inspect the XLR connectors for any visible damage or debris; clean if necessary.
Verify that the cable is properly seated in both the microphone and the destination device. Ensure that other audio equipment or power sources are not creating interference. Try using the cable with a different microphone or input to isolate the issue. Check the cable's shielding integrity; if damaged, the cable may need replacement.
Check for bent pins inside the XLR connector. Ensure the locking mechanism on the male connector is fully disengaged before attempting to plug in or pull out. Do not force the connection; this could damage the pins or connectors.
Setup: Simply plug the female end of the XLR connector into your microphone or audio device and the male end into your mixing desk, audio interface, or PA system. Ensure a firm click is heard to confirm the connection is secure.
Compatibility: This is a balanced 3-pin XLR cable. It is compatible with most microphones (dynamic, condenser, shotgun), speakers, mixers, and audio interfaces that feature standard 3-pin XLR connections.
Care: To maintain optimal performance and longevity:
