Best current price£124.95from eBay
Shopping.co.uk recommended and popular offers
eBay£124.95Visit shop Sealey AK714 5 Piece Blind Bearing Puller Set
Visit shop
B&Q£149.22Visit shop B&Q - Ak714 Blind Bearing Puller Set 5Pc
Visit shop6 offers from £124.95 - £149.22
View price history by clicking the chart icon.
This Sealey Blind Bearing Puller Set (AK714) is designed for mechanics and DIY enthusiasts needing to remove bearings from blind housings. Its key benefit is providing a secure and effective grip on a range of internal bearing diameters using its specialized collets and slide hammer. A potential caveat is that the medium stroke slide hammer may require significant force for very stubborn or large bearings.
| Model Part Number | AK714 |
|---|---|
| Brand | Sealey |
The set includes four collets with internal capacities ranging from 11mm to 32mm. The largest collet is designed for bearings with an internal diameter of 25-32mm.
No, this set is specifically designed as a *blind* bearing puller, meaning it is for removing bearings from housings where only internal access is available. It grips the inner diameter of the bearing.
The collets are part of a set designed for bearing extraction and are typically made from hardened steel to withstand the forces involved.
Wipe the slide hammer clean with a dry cloth after each use. For stubborn grime, use a damp cloth and dry thoroughly. A light application of oil can prevent rust on the shaft.
The medium stroke slide hammer has an overall length of 380mm and a hammer weight of 0.85kg.
Yes, this tool is suitable for removing various bearings found in automotive components such as wheel hubs, alternators, and other auxiliary systems where bearings are pressed into blind housings.
The set is supplied in a dedicated storage case. Always return the collets and slide hammer to their designated spots within the case after use to protect them from damage and ensure they remain organized.
Ensure you have selected the collet with the closest internal diameter match to the bearing. For slightly looser fits, try a different collet or ensure the collet is fully seated against the bearing's inner race.
Verify the collet is properly engaged. For stubborn bearings, try gently rotating the collet slightly after engagement to break any corrosion seal. Consider using a penetrating lubricant around the bearing seat and allow it to soak before re-attempting extraction. For very large or seized bearings, a more powerful slide hammer might be required.
Cease operation immediately. The selected collet may be too large for the bearing or the bearing is excessively seized. Check for damage on the collet and consider using a different, appropriately sized collet. Do not force a collet that is not a correct fit.
Setup:
Compatibility: This set is designed for bearings with internal diameters ranging from 11mm to 32mm. It is most effective when the collet can grip the *internal* diameter of the bearing race. It is not suitable for bearings with external diameters that exceed the capacity of the collets or for bearings where external access is available.
Care:
