Plumb Right offers you a new range of fully certified Solder Ring fittings.
Best current price£1.73from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.73Visit shop Plumbright Solder Ring P12s 15Mm Street Elbow Fitting 24016507
Visit shop1 offer from £1.73
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts working with water pipe systems. The Plumbright Solder Ring P12S 15mm Street Elbow Fitting offers a reliable and certified connection for your plumbing needs, ensuring a secure joint. A key consideration is that it requires soldering for installation, demanding specific tools and skills.
| Model Part Number | 24016507 |
|---|---|
| Brand | Plumbright |
A solder ring fitting contains a ring of solder within the fitting's socket. When heated, this solder melts and is drawn into the gap between the pipe and fitting by capillary action, creating a sealed joint.
No, this fitting is designed specifically for use with 15mm copper pipes. It is not compatible with plastic pipe systems.
For domestic water systems, it is recommended to use lead-free solder compliant with relevant plumbing regulations.
A typical solder joint can take 1-3 minutes to heat and solder properly, depending on the size of the fitting and pipe, and the heat source used.
A standard elbow connects two pipes of the same size. A street elbow has a spigot end on one side (to insert into another fitting) and a socket on the other (to accept a pipe or fitting).
While a DIYer can install it, soldering requires practice and specific tools. For critical applications or if you are inexperienced, hiring a professional plumber is recommended to ensure a reliable joint.
Ensure the pipe and fitting are clean and properly fluxed. Reheat the joint evenly and apply solder to the opposite side of the heat source.
The joint may not have been heated sufficiently or solder did not fully penetrate. The fitting may need to be cut out and replaced, followed by a new soldered joint.
Check for any burrs or obstructions on the pipe end or inside the fitting. Ensure both are clean and deburred.
Use a controlled flame and heat the fitting only as much as necessary for solder to flow. Allow fittings to cool naturally.
Setup: This fitting requires soldering for installation. Ensure you have the necessary tools: a propane torch, lead-free solder, flux, pipe cleaner/emery cloth, and a damp cloth.
Compatibility: The Plumbright Solder Ring P12S is designed for use with standard 15mm copper pipe. It is not compatible with push-fit or compression fittings.
Care: Once installed, these fittings require no specific ongoing care beyond general plumbing system maintenance. Ensure no excessive stress is placed on the joint.
