Ryobi Cordless Grass Strimmer Trimmer Spool and Twisted Line - 2mm X 3.3M

No, this is a non-genuine replacement spool designed to be compatible with selected Ryobi Grass Trimmers.

This spool comes pre-loaded with 3.3 meters of 2mm diameter green twisted line.

It is compatible with Ryobi ONE+ Cordless Trimmers including 18v, 24v, and 40v models, specifically serving as a replacement for part number AC80RL3.

Each spool contains 3.3 meters of line.

While suitable for general grass trimming, the 2mm twisted line may not be ideal for very tough weeds or dense vegetation. For such tasks, a thicker or more robust line might be necessary.

You will need to remove the spool cover of your Ryobi trimmer, take out the old spool, and insert the new one, ensuring the line is fed through the designated eyelets. Refer to your trimmer's user manual for detailed instructions.

This product comes as a pack of one replacement spool.

Check if the line has completely run out. Ensure the spool is correctly seated in the housing and the line is properly threaded through the eyelets. If the line is tangled, remove the spool and manually untangle or replace the spool.

The line may be too short, worn down, or unevenly fed. Ensure the spool is properly installed. Check if the line is evenly wound. If performance does not improve, replace the spool.

The line may be unevenly wound on the spool, or the spool may not be seated correctly. Ensure the spool is correctly installed and the line is wound neatly. Check for any damage to the spool housing.

The line may be old or brittle, or you may be trimming against hard surfaces. Ensure the line is fresh. Adjust your trimming technique to avoid contact with hard objects like concrete or metal fencing.