Best current price£154.27from eBay
Shopping.co.uk recommended and popular offers
eBay£154.27Visit shop Suretherm Anti-Condensation & Anti-Mould Thermal Paint- 10 LTR (approx. 40m2)
Visit shop1 offer from £154.27
View price history by clicking the chart icon.
This 10-litre container of N-Virol Suretherm thermal paint in white is ideal for homeowners and decorators looking to combat mould and condensation on interior walls and ceilings. Its key benefit is the advanced glass bubble technology, which provides enhanced thermal insulation to reduce heat loss and prevent moisture build-up. A potential caveat is that results may vary depending on the severity of existing mould and the surface preparation.
| Colour | White |
|---|---|
| Brand | N-Virol |
Glass bubble technology involves microscopic hollow glass spheres within the paint. These spheres create a thermal insulating layer, helping to keep surfaces warmer and reduce heat loss.
Walls should be clean, dry, and free from dust, grease, and loose paint. Any existing mould must be removed with a suitable cleaner, and the surface must be completely dry before application.
This paint is designed for interior walls and ceilings in living areas, bedrooms, kitchens, and bathrooms. It is not suitable for exterior use or high-traffic floor areas.
The paint additive is designed to enhance the performance and application of the Suretherm paint, optimizing its thermal insulating and mould-resistant properties.
Coverage can vary based on surface porosity and application method, but a 10-litre container typically covers a substantial area, suitable for multiple rooms. Refer to the product's specific coverage details for precise figures.
Clean painted surfaces gently with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the paint finish.
The paint helps to reduce condensation by keeping surfaces warmer, but it is not a substitute for proper ventilation. In areas with high humidity, ensuring good air circulation is still crucial.
Ensure the surface is properly prepared and free from dirt or grease. Stir the paint thoroughly, including the additive, and apply thin, even coats rather than one thick coat.
Confirm that all existing mould was removed prior to painting. Ensure there is adequate ventilation in the room to prevent excessive moisture build-up. Address any underlying causes of dampness (e.g., leaks).
Verify that the paint was applied evenly and that the glass bubble technology is not obscured by excessively thick coats or debris. Ensure the room itself is adequately heated.
Stir the paint frequently during application. Use a high-quality roller or brush suitable for emulsion paints. Ensure the additive is fully incorporated according to instructions.
Preparation: Before painting, ensure the surface is clean, dry, and free from dust, grease, and loose material. Remove any existing mould with a suitable cleaner and allow the surface to dry completely. For optimal adhesion and performance, surfaces should be sound.
Application: Stir the paint thoroughly before use. The included paint additive should be mixed in according to the additive's instructions. Apply using a brush or roller in thin, even coats. Avoid applying in excessively thick layers, as this can reduce the effectiveness of the glass bubble technology. Two coats are generally recommended for best results.
Compatibility: This paint is suitable for most interior wall and ceiling surfaces, including plaster, drywall, and previously painted surfaces. It is not designed for use on floors or exterior surfaces.
Care: Once dry, the paint can be cleaned with a soft, damp cloth. Avoid abrasive cleaners or scrubbing, which could damage the surface or the paint's thermal properties. Ensure adequate ventilation in the room after application until fully cured.
