Best current price£99.97from Drones Direct (BID)
Shopping.co.uk recommended and popular offers
Drones Direct (BID)£99.97Visit shop Xl Joinery Internal Oak 3-Panel Fd30 Fire Door - Unfinished - 2040 X 626 X 44Mm - Worcester
Visit shop
B&Q£104.97Visit shop B&Q - Internal Worcester Oak Fire Door 2040 X 926 X 44mm
Visit shop5 offers from £99.97 - £124.97
View price history by clicking the chart icon.
This guide is for homeowners and builders looking for a stylish and functional internal fire door. The XL Joinery Worcester Oak Fire Door offers a half-hour fire rating and complements the Metropolitan Oak Collection with its unfinished oak appearance. While it provides excellent design consistency, it requires finishing before installation.
| Colour | Brown |
|---|---|
| Model Part Number | INTOWOR626-FD |
| Brand | XL Joinery |
No, the XL Joinery Worcester Oak Fire Door is supplied unfinished and requires finishing before installation.
This door has a half-hour (30-minute) fire rating.
Minor trimming may be possible, but always check the manufacturer's specific guidelines for fire doors, as excessive trimming can compromise the fire rating. Typically, no more than 3mm per edge is permissible.
You must use hardware (hinges, latches, locks) that is specifically certified for use with fire doors to maintain the door's fire rating.
No, this product is for the door leaf only. Hardware such as hinges, handles, and locks must be purchased separately.
The dimensions are 2040mm in height, 626mm in width, and 44mm in thickness.
No, this is an internal door and is not designed or rated for external use.
Check if the frame is square and plumb. Measure the door and the frame opening carefully. If the door is slightly too large, it may require careful trimming (usually no more than 3mm from any edge, and check fire door specific guidelines on trimming). If it's too small, a larger door or frame adjustment may be necessary.
Ensure the door was properly prepared (sanded, cleaned) before finishing. Use the correct type and number of coats of finish as recommended by the finish manufacturer. Allow adequate drying time between coats.
Verify that all hardware (hinges, locks, latches) is certified for use on fire doors and is compatible with the 44mm door thickness. Ensure mortises are cut accurately and hardware is installed according to manufacturer instructions.
Setup: This door is supplied unfinished and requires preparation before hanging. Ensure the door is dry and clean. Sand the surfaces smooth and apply your chosen finish (paint, varnish, or stain) following the manufacturer's instructions for the finish. For fire doors, it is crucial to use the correct type of ironmongery (hinges, locks, latches) that is certified for use with fire doors. Always follow the specific guidelines provided by the door manufacturer and ironmongery supplier regarding installation and hardware.
Compatibility: The Worcester Oak Fire Door is designed to be part of the XL Joinery Metropolitan Oak Collection. While it features specific dimensions (2040 x 626 x 44mm), it may require trimming to fit non-standard openings. Check with your installer or local building regulations for any specific requirements regarding fire door sizing and fitting.
Care: Once finished, clean the door with a soft, damp cloth. Avoid abrasive cleaners or excessive moisture. For unfinished areas or if the finish becomes damaged, reapply the protective coating as needed to maintain the door's integrity and appearance.
