Waterproof Tile Membrane Fleece Roll - thisiswholesale.co.uk

Its primary function is to create a waterproof barrier on walls and floors beneath tiles, preventing water damage in wet areas like showers and bathrooms.

Yes, it is designed for both wall and floor applications in wet environments.

Adjacent sections should overlap by at least 5-10cm and be sealed with compatible waterproof tape and a suitable sealant for a watertight connection.

It is compatible with most standard tile adhesives. Always refer to the adhesive manufacturer's instructions for suitability with waterproofing membranes.

Yes, it can be used with underfloor heating systems, provided it is installed according to the underfloor heating system manufacturer's guidelines.

The product is available in 5m², 10m², 20m², and 30m² roll sizes.

The entire surface should be covered and embedded in adhesive. Seams require specific attention with overlap and sealing tape to ensure a continuous waterproof barrier.

Review installation for any gaps in coverage, unsealed seams, or improperly applied adhesive. Address any identified breaches and re-seal if necessary.

Ensure the substrate was clean, dry, and free of contaminants before adhesive application. Use the correct type of adhesive and apply it evenly.

Repair small tears by applying a patch of the fleece material with compatible adhesive and sealant, ensuring it is fully embedded and sealed.

Ensure the fleece was fully embedded into wet adhesive without air pockets during installation. Use a smoother or roller to press it in firmly.