Slik Creators Clamp
Best current price£58.59from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
PCHUB.UK£58.59Visit shop Slik Creator’s Clamp
Visit shopPCHUB.UK£58.59Visit shop All Offers
2 offers from £58.59 - £70.31
View price history by clicking the chart icon.
Product Information
Full details
The Slik Creator's Clamp is a versatile mounting solution for video creators, offering a secure way to attach cameras and accessories to surfaces where tripods are impractical. Its primary benefit lies in its flexibility, allowing for unique camera angles and perspectives. However, a key consideration is its weight capacity, which varies significantly between flat surfaces and pipes, and the need for a separate pan head for camera attachment.
All features
| Brand | SLIK |
|---|
Extended Product Information
FAQs
What is the maximum weight capacity of the Slik Creator's Clamp?
The maximum load capacity is 5 kg when mounted on a flat surface (up to 75mm thick) and 2 kg when mounted on a pipe (diameter 20-48.6mm).
Do I need a tripod head to use this clamp?
Yes, you need to attach a tripod head (sold separately) to the included adapter to mount your camera.
Can I mount the clamp on a table leg?
Yes, the clamp is designed to grip pipes, so it can be attached to table legs within the specified diameter range (20-48.6mm).
What accessories are included with the Creator's Clamp?
The clamp comes with the Creator clamp body, a pan head adapter (U1/4/U3/8 inverted type), a hex wrench (width across flats 5mm), and two rubber plates.
Can I achieve a bird's-eye view with this clamp?
A true bird's-eye view can be achieved by using the clamp in combination with the separately sold SLIK Sliding Arm II.
How do I clean the clamp?
Clean the clamp body with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents.
Can I attach a microphone or light directly to the clamp?
Yes, the clamp features two accessory holes that allow you to attach compatible accessories like microphones or small lights.
Troubleshooting
Clamp does not grip securely
Ensure the surface is within the specified clampable size (5-75mm for flat, 20-48.6mm for pipes). Check that the clamp jaws are clean and correctly positioned. Tighten the clamp firmly using the hex wrench.
Camera is unstable after mounting
Verify that the total weight of the camera and tripod head does not exceed the maximum load capacity for the mounting surface type (5kg for flat, 2kg for pipes). Ensure the tripod head is securely attached to the adapter and the clamp is firmly secured.
Pan head adapter is difficult to attach
Ensure you are using the correct thread size (1/4" or 3/8") from the adapter and that it is clean and free of debris. Do not overtighten.
Accessory holes seem too small
The accessory holes are designed for specific mounting types. Ensure your accessory's mounting stud or base is compatible with the hole size. Adapters may be required for some accessories.
Pros and Cons
Pros
- Offers flexible camera placement options beyond traditional tripods.
- Accommodates a wide range of mounting surfaces due to its reversible clamp design.
- Provides convenient mounting points for additional accessories like lights or microphones.
- Enhances creative shooting possibilities, especially with optional accessories like the Sliding Arm II.
- Includes essential adapters for immediate use with tripod heads.
Cons
- Maximum load capacity is significantly lower when clamping onto pipes (2kg) compared to flat surfaces (5kg).
- Requires a separate pan head (sold separately) for mounting a camera.
- The included pan head adapter is for tripod heads, not for direct camera mounting.
- Can be cumbersome to adjust angles without additional accessories.
- The 'gooseneck diameter' is listed but refers to the clamp's clampable pipe diameter, not a flexible arm.
Setup, Compatibility & Care
Setup:
- Identify the mounting surface: a flat surface (desk, shelf) or a pipe (table leg, railing).
- Adjust the clamp jaws: If mounting on a pipe, ensure the jaws are positioned to grip the pipe securely. For flat surfaces, ensure the jaws provide a firm, even grip.
- Tighten the clamp: Use the hex wrench to securely fasten the clamp to the chosen surface. Be mindful of the maximum load capacity for the surface type.
- Attach the pan head adapter: Screw the included U1/4"/U3/8" inverted type pan head adapter onto the clamp's receiving thread.
- Mount your tripod head: Secure your tripod head onto the adapter.
- Attach camera/accessories: Mount your camera or other accessories to the tripod head.
Compatibility:
- Mounting Surface: Compatible with flat surfaces up to 75mm thick and pipes with a diameter of 20mm to 48.6mm.
- Camera Mount: Requires a standard tripod head (sold separately) which attaches via the included 1/4" or 3/8" adapter.
- Accessories: Can accommodate accessories via the integrated accessory holes, such as lights or microphones.
- Optional Accessories: Works with the SLIK Sliding Arm II for advanced positioning.
Care:
- Clean the clamp body with a dry or slightly damp cloth. Avoid using harsh chemicals or solvents.
- Periodically check all screws and connections for tightness.
- Ensure the rubber plates are clean and properly seated to prevent slippage on flat surfaces.
- Store in a dry place when not in use.