PlastiKote Quick Dry Acrylic Spray - 400ml - White Matt

It is touch dry in 10 minutes. However, allow more time for complete drying and curing before handling or using the painted item.

It is suitable for wood, metal, plastic, and other surfaces. Always ensure the surface is properly prepared.

One can covers approximately 1-1.75m².

Clean the surface thoroughly to remove any dirt, grease, or loose paint. Lightly sand the surface for better adhesion.

Yes, apply thin, even coats, allowing each coat to dry completely before applying another.

Store in a cool, dry place away from direct sunlight and heat sources. Ensure the can is properly sealed.

Turn the can upside down and spray until only propellant comes out. If this doesn't work, clean the nozzle with a solvent or replace it.

Apply thinner coats and ensure the nozzle is clean. Hold the can at the correct distance from the surface.

Ensure the surface is properly prepared – clean, dry, and free of any contaminants. Consider using a primer.

Clean the nozzle after each use. If clogged, try soaking it in a solvent or replacing it.