Best current price£477.85from eBay
Shopping.co.uk recommended and popular offers
eBay£477.85Visit shop Minitrix DBAG BR155 232-2 Electric Locomotive VI (DCC-Sound) M16652 N Gauge
Visit shop1 offer from £477.85
View price history by clicking the chart icon.
This N scale (1:160) model is designed for model railway enthusiasts who appreciate detailed replicas of heavy freight locomotives. Its key benefit is the authentic DCC sound and digitally controlled pantographs, offering a realistic operational experience. A potential caveat for some users might be the need for a DCC-compatible control system to fully utilize its advanced features.
| Model Part Number | 16652 |
|---|---|
| Brand | MiniTrix |
This is an N scale model, with a scale of 1:160.
Yes, to fully utilize the DCC sound, digitally controlled pantographs, and directional lighting, a DCC-compatible controller and track system are required.
Yes, the locomotive can operate on analog DC power, but features like sound and digital pantograph control will be limited or non-functional. Basic lighting will typically operate based on direction of travel.
The method for changing the DCC address depends on your DCC system. Refer to the MiniTrix product manual that came with the locomotive for specific instructions on programming the decoder.
NEM couplings are standardized couplings used in model railways, allowing for easy and compatible connection between different manufacturers' rolling stock.
Use a soft, dry cloth to clean the exterior. Avoid any liquids, solvents, or abrasive materials that could damage the paint or plastic.
The length over the buffers is 122 mm.
Ensure the DCC controller is active and the locomotive's address is correctly set. Check track power and ensure all wheels are making good contact with the rails. Verify that the decoder is correctly installed and functioning.
Confirm that sound is enabled on your DCC controller. Check the volume settings. If the sound is distorted, the decoder might require attention; consult the manual or manufacturer support.
Verify you are using the correct DCC function commands for pantograph control as specified in the product manual. Ensure the locomotive is receiving sufficient power and the DCC signal is strong.
Check the lighting function settings on your DCC controller. Ensure the locomotive is properly oriented on the track according to the direction of travel. Dirty wheels or track can also affect lighting.
Clean the locomotive's wheels and the track. Ensure the track is level and properly connected. The flywheel mechanism may need lubrication; consult the manual for guidance.
Setup:
Compatibility:
Care:
