Best current price£11.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.99Visit shop B&Q - Teak Brown Semi Matt Vinyl Film Wrap Sticky Back Plastic Self Adhesive 2M X 67.5Cm
Visit shop2 offers from £11.99 - £16.99
View price history by clicking the chart icon.
This D-C-Fix Teak Brown Vinyl Wrap is designed for DIY enthusiasts and homeowners looking to quickly and affordably refresh furniture and surfaces. Its key benefit is providing a professional, durable finish with an easy peel-and-stick application. A potential caveat is that results may vary on textured or unprepared surfaces, requiring thorough surface preparation for optimal adhesion.
| Model Part Number | F3468237 |
|---|---|
| Brand | d-c-fix |
The surface must be smooth, clean, dry, and free from dust, grease, or old adhesive. For porous surfaces like unpainted wood, priming and sealing is recommended for optimal adhesion and longevity.
It is generally not recommended to apply directly over wallpaper, especially if the wallpaper is textured or peeling. The vinyl may not adhere well, and removal could damage the wallpaper underneath.
The vinyl wrap is heat-resistant up to approximately 70°C (158°F). It is suitable for surfaces like kitchen counters but should not be used for direct contact with hot pots, pans, or dishes straight from the oven or stovetop.
Minor adjustments can be made if you lift the film quickly after initial placement before full adhesion. However, repeated repositioning may weaken the adhesive. It's best to apply carefully and deliberately.
Clean the surface using a soft, damp cloth with mild soap or detergent. Rinse with clean water and dry thoroughly. Avoid using abrasive scouring pads or harsh chemical cleaners.
Each roll of D-C-Fix Teak Brown Vinyl Wrap measures 2 meters in length and 67.5 centimeters in width.
This product is designed for indoor use. Outdoor applications may lead to premature degradation due to UV exposure and weather conditions.
Lift the vinyl film carefully before it adheres completely and reapply, smoothing from the center outwards with a squeegee. For small bubbles, gently prick with a fine needle and smooth down.
Ensure the surface is thoroughly cleaned, dried, and free of dust, grease, or any residues. Re-clean the surface and try reapplying, ensuring firm pressure is applied during smoothing.
Use a very sharp craft knife or utility blade and a straight edge for precise cuts. Replace the blade if it becomes dull.
Gently warm the residue with a hairdryer on a low setting and then carefully peel or wipe it away with a soft cloth and a mild adhesive remover or rubbing alcohol. Test in an inconspicuous area first.
Setup:
Compatibility:
Care:
