D-C-Fix Woodgrain Flagstaff Oak Self Adhesive Vinyl Wrap Film - 5m L x 45cm W
Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability.
This guide is for anyone looking to revitalize furniture or surfaces with the D-C-Fix Woodgrain Flagstaff Oak Self Adhesive Vinyl Wrap Film. It offers an affordable and easy-to-apply solution to update the look of your home without the cost of new furniture. Keep in mind that while the adhesive is repositionable, it's crucial to prepare the surface properly for the best results.
All features
Model Part Number
200-3265-5
Brand
d-c-fix
Extended Product Information
FAQs
Can I use this on a curved surface?
Yes, but it requires careful application. Use a hairdryer to apply heat and stretch the vinyl as you go.
How do I remove the vinyl?
Use a hairdryer to heat the vinyl and gently peel it back. Any remaining residue can be removed with warm, soapy water.
What tools do I need?
You'll need a measuring tape, scissors or a utility knife, a squeegee or soft cloth, and a hairdryer.
Can I use this in a bathroom?
Yes, it is water-resistant, making it suitable for bathrooms, but ensure the surface is completely dry during application.
Is it easy to reposition?
Yes, the water-based adhesive allows for repositioning during application. However, once adhered, it becomes more difficult.
How long will it last?
With proper care and application, it can last for several years.
Does the color fade?
The product has a 5-star rating for lightfastness; however, prolonged direct sunlight exposure can cause some fading over time.
Troubleshooting
Bubbles appear after application.
Lift the vinyl and smooth out the bubbles with a squeegee or soft cloth. Alternatively, use a pin to prick the bubble and smooth it out.
The vinyl is not sticking to the surface.
Ensure the surface is clean, dry, and free of any contaminants. Apply firm pressure during application.
Edges are lifting.
Trim the edges neatly and use a hairdryer to apply heat, then press down firmly to seal. Alternatively, use an edge sealant.
Pros and Cons
Pros
Cost-effective alternative to replacing furniture.
Simple application process.
Repositionable for error correction.
Durable and long-lasting.
Easy to remove without causing significant damage.
Wide range of applications.
Cons
Requires careful surface preparation for optimal adhesion.
May not be suitable for all types of surfaces.
Removal might leave some residue.
Edges can be prone to peeling if not applied and sealed correctly.
The look may not be to everyone's taste.
Setup, Compatibility & Care
Setup:
Surface Preparation: Clean the surface thoroughly with warm, soapy water. Ensure it's dry and free of dust, grease, and any other contaminants.
Measuring and Cutting: Measure the surface and cut the vinyl film slightly larger than required.
Application: Peel back a small section of the backing and apply the adhesive side to the surface, smoothing out bubbles with a squeegee or a soft cloth. Continue peeling and smoothing as you apply.
Trimming: Once applied, trim the excess vinyl using a sharp blade or utility knife.
Compatibility:
Suitable for smooth, non-porous surfaces like wood, laminate, and metal.
Not recommended for rough or textured surfaces, as the adhesive may not adhere properly.
Care:
Clean with a damp cloth and mild detergent.
Avoid abrasive cleaners or harsh chemicals.
Protect from prolonged exposure to direct sunlight to prevent fading.