Plastic Drywall Anchors With Screws Anti Rotation Wall Plugs - Yellow

These high-strength plastic drywall anchors are designed for superior performance and reliability....

Best current price£9.00from B&Q

One Offer

1 offer from £9.00

View price history by clicking the chart icon.

B&Q - 6mm 500Pcs Wall Plugs Drywall Anchors Anti Rotation Yellow Wall Plugs For BrickConcretePlasterboard
Free delivery in 1–3 days
£9.00
Visit shop

Product Information

Full details

These high-strength plastic drywall anchors are designed for DIY enthusiasts and homeowners who need a reliable, secure way to mount fixtures into brick, concrete, or plasterboard walls. Their primary benefit is the anti-rotation design, which prevents the plug from spinning while you drive the screw, ensuring a stable connection on the first attempt. Please note that while these are highly effective for standard home applications, they are not intended for heavy-duty structural loads or large-scale industrial installations.

All features

ColourYellow
BrandB&Q

Extended Product Information

FAQs

Can these be used in hollow drywall?

Yes, these are designed specifically for drywall and plasterboard, where the wings expand to grip the back of the panel.

Do I need a special tool to install these?

No, you only need a drill for the pilot hole and a standard screwdriver.

Are the screws included?

Yes, this kit comes with matching screws optimized for these specific anchors.

Can I reuse these anchors after removing a shelf?

It is generally not recommended to reuse plastic anchors as the expansion structure is often deformed during the initial installation.

How much weight can these hold?

While holding power varies by wall material, these are intended for common household fixtures like mirrors, picture frames, and small shelves.

Troubleshooting

Anchor spins while trying to drive the screw

The drill hole is likely too large. Try using a smaller drill bit or using a wall patch filler to tighten the hole diameter.

Screw is difficult to drive in

Ensure you are using the correct screwdriver size or check that the anchor is fully seated flush with the wall.

Pros and Cons

Pros

  • Prevents annoying spinning during screw insertion
  • Easy to install without the need for specialized tools
  • Provides reliable holding power in multiple wall materials
  • Durable construction resists degradation over time

Cons

  • Not suitable for extremely heavy or dynamic loads
  • Requires precise drill bit sizing for a secure fit
  • Plastic may crack if over-tightened with high-torque power tools

Setup, Compatibility & Care

  1. Drill: Use a masonry bit for brick or concrete, and a standard twist bit for plasterboard. Ensure the hole depth is slightly deeper than the length of the anchor.
  2. Insert: Push the anchor into the hole until it is flush with the wall surface. A gentle tap with a hammer may be required.
  3. Mount: Align your fixture, insert the provided screw, and tighten until firm. Avoid over-tightening with an impact driver to prevent stripping the material.
  4. Care: Keep the anchors stored in a dry environment. If you need to remove the fixture, reverse the screw carefully; the anchor is designed for single-use in most applications and should be replaced if damaged during removal.

Price History

DatePrice
Visit shop