Best current price£16.49from eBay
Shopping.co.uk recommended and popular offers
eBay£16.49Visit shop Washing Machine Fill Hose Drain Kit 5 Metres 2.5m 5m for HOWDENS LAMONA
Visit shop4 offers from £16.49 - £17.19
View price history by clicking the chart icon.
This washing machine fill and drain hose kit is for Hotpoint, Ariston, and Indesit washing machine owners who need to extend the reach of their appliance's water supply and drainage. The key benefit is the significantly increased flexibility in appliance placement, allowing connection up to 5 metres away from the water source and increasing drain reach by 2.5 metres. A caveat is that it's designed for standard models, so compatibility with non-standard or older appliances should be verified.
| Brand | Universal |
|---|
No, this fill hose is designed specifically for the cold water supply to your washing machine.
This kit is specifically designed for Hotpoint, Ariston, and Indesit standard models. While the 3/4" BSP connector is common, compatibility with other brands is not guaranteed and should be verified by the user.
The drain hose extension slides onto the end of your washing machine's original drain hose. A pipe fastening clip is provided to secure the connection and prevent it from separating during operation.
No, the fill hose provided is 5 metres long. For distances greater than 5 metres, you would need to source a longer hose or consider relocating your appliance or water supply.
Both fill hose end connectors are standard 3/4" BSP diameter.
The kit includes connectors for the appliance end of the fill hose. You will need a standard washing machine tap connector (usually 3/4" BSP) to connect the other end of the fill hose to your household water tap.
The drain hose is designed to be flexible. However, avoid sharp kinks or bends that could restrict water flow. Smooth, gentle curves are recommended for optimal performance.
Ensure the fill hose is securely connected to both the tap and the washing machine. Check that the water tap is turned on and that there are no kinks in the fill hose. Verify the 3/4" BSP connection is tight and the internal seal is in place.
Check that the 3/4" BSP connectors are fully tightened. Ensure the integrated pipe seals on both ends of the fill hose are present and correctly seated. Inspect the hose for any damage.
Ensure the drain hose is not kinked or crushed. Verify that the drain hose extension is securely attached to the original hose and that the fastening clip is in place. Check that the end of the drain hose is not submerged too deeply in the drainpipe or standpipe.
Allow the hose to warm up to room temperature if it has been stored in a cold environment. Ensure it is routed smoothly without sharp bends.
Setup:
Compatibility:
Care:
