Magnusson Sharpening Stone - 200/300/400/600 Grit

The frequency depends on how often you use your tools. Sharpen tools regularly to maintain their sharpness. Dull tools require more frequent sharpening.

Start with a coarser grit (200 or 300) to remove material and establish a new edge. Then move to finer grits.

Use a lapping plate or a flattening stone to keep the surface even. This is especially important for maintaining effective sharpening.

It's recommended to use water with this sharpening stone, as it's designed to be used with water. Check the manufacturer's instructions for specific recommendations.

Rinse the stone with water and use a brush to remove metal particles after each use. Avoid harsh cleaning agents.

The different grits serve different purposes: coarse grits for removing material and repairing damage, medium grits for refining the edge, and fine grits for polishing and honing the edge.

Test the blade's sharpness by carefully slicing through paper or checking the edge for a clean cut.

Ensure the stone is properly lubricated with water. Check the angle of the blade against the stone and adjust as needed. Try using a coarser grit first if the blade is very dull.

Apply less pressure during sharpening. Ensure the stone is flat by using a lapping plate to resurface it periodically.

Clean the stone with a brush and water after each use. You can also use a stone cleaning solution if necessary.