Shopping.co.uk

Tormek SJ-200 - 4000 Grit - attributes: brand:Tormek, mpn:SJ200

Tormek SJ-200 - 4000 Grit - attributes: brand:Tormek, mpn:SJ200

The SJ-200 Japanese Waterstone is designed for sharpening hand tools such as woodcarving tools, kn...

Best current price£229.56from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £229.56 - £235.20

View price history by clicking the chart icon.

eBayTORMEK SJ-200 Japanese Waterstone 4000 Grit
Free delivery in 1–3 days
£229.56
Visit shop
B&QB&Q - Japanese Waterstone 200 mm
Free delivery in 1–3 days
£235.20
Visit shop

Product Information

Full details

This guide is for craftspeople and hobbyists who need a fine, razor-sharp edge on their tools, like woodcarving tools, knives, and chisels. The Tormek SJ-200 Japanese Waterstone excels at providing an extremely fine surface finish, resulting in tools that cut cleanly and precisely. Keep in mind that this stone is designed for honing and finishing, not for reshaping or significant material removal.

All features

Model Part NumberSJ200
BrandTormek

Extended Product Information

FAQs

How often should I soak the stone?

Soak the stone before each sharpening session, or whenever the stone appears dry.

Can I use the SJ-200 to reshape a tool's edge?

No, the SJ-200 is designed for honing and finishing, not for reshaping. Use a coarser grinding wheel for that purpose.

How do I maintain the flatness of the stone?

Use a stone grader periodically to flatten the surface and remove any uneven wear.

What is the grit rating of the SJ-200?

The SJ-200 has a 4000 grit rating.

Can I use the SJ-200 on power tools?

This stone is designed for use on hand tools and is not recommended for use with power tools.

How long will the SJ-200 last?

The SJ-200 has a long service life, but the exact lifespan depends on usage frequency and the amount of material removed.

What type of tools can be sharpened with this stone?

It is designed for sharpening hand tools such as woodcarving tools, knives, scissors, plane irons and chisels.

Does the stone require any special lubricants?

No, the SJ-200 is used with water. Just soak the stone in water before use.

Troubleshooting

Stone not cutting effectively.

Ensure the stone is properly soaked in water before use. Check for any glazing on the surface and consider using a stone grader to refresh the surface.

Uneven sharpening results.

Check the tool angle and ensure it is consistent throughout the sharpening process. Make sure the stone surface is flat.

Pros and Cons

Pros

  • Produces an incredibly sharp edge.
  • Leaves a mirror-like finish on the tool's bevel.
  • Extremely long-lasting due to its unique composition.
  • Perfect for honing and maintaining existing edges.
  • Enhances the cutting performance of hand tools.

Cons

  • Not suitable for reshaping tools or removing large amounts of material.
  • Requires a separate grinding wheel for initial shaping.
  • Limited abrasive power compared to coarser stones.
  • May require more time to achieve the desired finish compared to coarser stones.

Setup, Compatibility & Care

  1. Preparation: Before use, soak the SJ-200 in water until it stops releasing air bubbles. This typically takes a few minutes.
  2. Mounting: The SJ-200 is designed to be used with Tormek sharpening systems or similar setups. Refer to the manufacturer's instructions for proper mounting.
  3. Sharpening: Apply the tool to the stone at the appropriate angle, using light pressure. The goal is to hone and refine the edge, not to remove a lot of material.
  4. Cleaning: After each use, rinse the stone with water to remove any steel particles or debris. Do not use any cleaning agents.
  5. Storage: Store the SJ-200 in a dry place to prevent cracking or damage. Avoid extreme temperatures.

Compatibility:

The SJ-200 is compatible with the Tormek T-7 and T-8 sharpening systems, as well as other systems that are designed to hold sharpening stones.

Price History

DatePrice
Visit shop