Schwalbe G-One Speed - 27.5x2.0 - Fold Brnz - RaceGuard
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Schwalbe G-One Speed tyre is designed for cyclists seeking reliable puncture protection on varied road and gravel surfaces, offering excellent performance with larger volume wheels. While it provides robust protection via its RaceGuard feature, users should note that additional sealant might be necessary for optimal tubeless performance. Key features include its RaceGuard protection, LiteSkin carcass, reinforced bead core, and tubeless-ready capability.
All features
| Model Part Number | SCR840B |
|---|---|
| Brand | Schwalbe |
Extended Product Information
FAQs
What is RaceGuard protection?
RaceGuard is a special rubber layer reinforced with nylon fabric that offers effective puncture protection. It's designed to be lightweight yet durable, ideal for roads and gravel surfaces.
Can I use these tyres with inner tubes?
Yes, these tyres can be used with standard inner tubes if you prefer not to set them up as tubeless.
What is the maximum tire pressure?
The specific maximum pressure is not listed in the provided information, but generally, for a 27.5x2.0 tyre, it would be around 30-50 PSI. Always refer to the sidewall markings or manufacturer's recommendations.
How much sealant do I need for a tubeless setup?
For this 27.5x2.0 tyre size, approximately 60-90ml of sealant per tyre is generally recommended. Consult the sealant manufacturer's guidelines for precise amounts.
What does ETRTO 50-584 mean?
ETRTO 50-584 specifies the tyre's dimensions: 50mm is the width, and 584mm is the bead seat diameter, corresponding to a 27.5-inch (650b) rim.
Are these tyres suitable for mud?
While they offer good grip on hard-packed surfaces and gravel, the G-One Speed's tread pattern is designed more for speed on smoother terrains. For very muddy conditions, a tyre with a more aggressive tread pattern might be more suitable.
Troubleshooting
Tyre will not seat on the rim.
Ensure the rim bed is clean and free of debris. Try increasing the inflation rate. For tubeless, check rim tape for leaks or damage.
Slow leaks or sealant not sealing.
Ensure adequate sealant is present and evenly distributed. Spin the wheel to help sealant coat the bead and any small punctures. Re-apply sealant if necessary.
Tyre feels sluggish or slow.
Check tire pressure; it may be too low. Ensure the tubeless sealant hasn't dried out. Verify the tyre is correctly seated and not deforming.
Visible wear on the RaceGuard or tread.
This indicates normal use. Monitor the tread depth; replace the tyre when the tread is significantly worn down or the RaceGuard layer becomes visible.
Pros and Cons
Pros
- Excellent puncture resistance with RaceGuard.
- Optimized for wider rims, enhancing speed and comfort.
- Tubeless-ready for a smoother, more reliable ride.
- Lightweight construction due to folding bead and LiteSkin carcass.
- Durable construction with a reinforced bead core.
Cons
- May require additional sealant for optimal tubeless setup.
- RaceGuard may slightly increase rolling resistance compared to non-protected tires.
- The 27.5x2.0 size might not be compatible with all frames or wheelsets.
- Folding bead, while lighter, can sometimes be less forgiving during installation than wire beads.
Setup, Compatibility & Care
Compatibility: This tyre is sized 27.5" x 2.00 (ETRTO 50-584), designed to fit 27.5-inch (650b) rims with an approximate internal width of 19mm to 25mm for optimal performance. Always verify your rim's ETRTO compatibility before installation.
Setup: For a tubeless setup, ensure you have appropriate tubeless-ready rim tape, rim valves, and tire sealant. Install the tyre onto the rim, add sealant (refer to sealant manufacturer's recommendations for quantity, usually 60-90ml for this size), and inflate to the desired pressure. For tube-type setups, use a compatible inner tube.
Care: Regularly inspect the tyre for wear, embedded objects, or damage. Clean the tyre with mild soap and water using a damp cloth. Avoid using harsh solvents or abrasive cleaners. Periodically check tire pressure to maintain optimal performance and longevity.