Set Of 8 Shower Door Rollers - 23mm Wheel Diameter
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for individuals needing to replace or upgrade their shower door rollers. The key benefit is restoring smooth, easy operation to your shower door. A potential caveat is ensuring compatibility with your specific shower door setup. This product is a set of 8 high-quality shower door rollers (4 top, 4 bottom) designed for easy installation and improved shower door functionality. Key features include adjustable top rollers for precise door alignment and spring-loaded bottom rollers for a secure fit.
All features
| Model Part Number | L051 |
|---|---|
| Brand | Shower Part |
Extended Product Information
FAQs
What is the wheel diameter of these rollers?
The wheel diameter of these shower door rollers is 23mm.
What size holes are required in the glass for these rollers?
The diameter of the hole required in the glass is 7.5mm.
What is the maximum glass thickness these rollers can accommodate?
These rollers are suitable for glass thickness ranging from 4mm to 6mm.
Can these rollers be used on curved shower doors?
Yes, the top rollers feature a swivel action which allows them to fit curved and quadrant showers.
How many rollers are included in a set?
Each set includes 8 rollers: 4 for the top and 4 for the bottom.
Are these rollers compatible with all shower brands?
They are suitable for Aqua and other showers, provided the glass hole dimensions (26mm apart, 7.5mm diameter) and glass thickness (4-6mm) match.
How do I adjust the height of the top rollers?
The top rollers have an adjustment screw. You can fine-tune the door's height by turning this screw after slightly loosening any locking nut.
Troubleshooting
Shower door is stiff or difficult to move after installation.
Double-check that the rollers are correctly seated on the tracks and that nothing is obstructing their path. Ensure the top rollers are adjusted correctly for level hanging and that the bottom rollers are not binding.
Door is not hanging straight or sealing properly.
Adjust the height of the top rollers. Loosen the locking nut slightly, turn the adjustment screw to raise or lower the roller, and then re-tighten the locking nut. Ensure the glass holes are exactly 26mm apart for proper alignment.
Rollers make a squeaking noise.
Clean the rollers and the tracks thoroughly. Apply a small amount of silicone-based lubricant to the wheel axle and the track if necessary, avoiding petroleum-based lubricants which can damage plastic components.
Bottom rollers seem loose or wobbly.
Ensure the spring-loaded mechanism on the bottom rollers is functioning correctly. Verify that the rollers are securely attached to the glass panel.
Pros and Cons
Pros
- Restores smooth and quiet shower door operation.
- Adjustable top rollers allow for perfect door alignment.
- Spring-loaded bottom rollers enhance stability.
- Versatile fit for curved and quadrant showers due to swivel action.
- Durable construction for long-lasting use.
Cons
- Requires specific glass hole diameter (7.5mm) and thickness (4-6mm).
- Compatibility depends on the distance between glass holes (26mm).
- May require some DIY skill for installation.
- Set of 8 may be more than needed for some single-door enclosures.
Setup, Compatibility & Care
Compatibility Check: Before purchasing, it is crucial to verify that these rollers are compatible with your shower door. Measure the diameter of the holes in your glass (must be 7.5mm) and the thickness of the glass (must be 4-6mm). Also, confirm that the distance between the two glass holes for each roller set is exactly 26mm.
Installation Steps:
- Ensure the shower door is safely removed from its tracks. It is recommended to have assistance for this step.
- Carefully unscrew and remove the old rollers from the glass panels.
- Attach the new top rollers (4) and bottom rollers (4) to the corresponding holes in the glass panels, using the provided screws or by re-using existing ones if they are compatible.
- For the top rollers, adjust the height using the adjustment screw to ensure the door hangs level and mates correctly with the frame or magnetic seal.
- For the bottom rollers, ensure they are properly seated and engage their spring-loading mechanism.
- Carefully re-hang the shower door onto its tracks, testing the smooth operation.
Care Instructions:
- Regularly clean the rollers and tracks to prevent the buildup of soap scum, limescale, and debris, which can impede smooth operation.
- Use a soft, damp cloth for cleaning. Avoid abrasive cleaners or scouring pads that could scratch the wheels or tracks.
- Periodically check that the roller screws remain tight.