Rada Pulse 120 Operating System - 1.1495.063

No, the Rada Pulse 120 Operating System is designed to work exclusively with the Rada Pulse Control Box system. It requires the control box for operation.

The programmable timing allows you to set the duration of water flow for both hand washing and showering, enabling water and energy conservation tailored to specific needs.

Yes, the 12-volt extra-low voltage supply ensures a safe operating environment, especially in wet areas like bathrooms and showers.

It is recommended to use only a soft, damp cloth. Avoid abrasive cleaners or chemicals, which can damage the sensor's surface and functionality.

Water flow duration is adjusted through the settings on the Rada Pulse Control Box. Please refer to the control box's user manual for specific instructions on programming.

Product warranty details are specific to the complete Rada Pulse system. Please consult the product documentation or Rada's official website for the most current warranty information.

Ensure the Rada Pulse Control Box system is powered on. Check that the sensor is clean and free from debris. Verify wiring connections between the sensor and the control box are secure. Confirm the sensor's proximity range is not obstructed.

Check the programmable timing settings on the Rada Pulse Control Box. Ensure the solenoid valve is not blocked or damaged. Verify adequate water pressure is available. Refer to the control box manual for calibration procedures.

Confirm the 12V power supply to the control box is active and stable. Reset the control box by cycling the power. If the issue persists, contact Rada technical support.