Setup, Compatibility & Care
Compatibility: Ensure your vehicle manufacturer's handbook specifies the use of an engine oil that meets ACEA C2 and 0W-30 viscosity grade. Additionally, confirm if the Jaguar Land Rover STJLR.03.5007 specification is recommended for your specific model. Using the incorrect oil can lead to engine damage and void warranties.
Setup (Oil Change):
- Ensure the engine is warm but not hot.
- Safely lift and support the vehicle.
- Locate and remove the engine oil drain plug.
- Allow the old oil to drain completely.
- Replace the drain plug with a new washer if recommended.
- Locate and remove the oil filter.
- Lubricate the rubber seal on the new oil filter with fresh oil and screw it into place hand-tight plus the manufacturer's recommended turn (usually 3/4 to 1 turn).
- Refill the engine with the correct quantity and grade of CASTROL EDGE Professional E 0W30 Engine Oil.
- Start the engine and check for leaks. Allow the engine to run for a few minutes, then switch it off and check the oil level. Top up if necessary.
Care: Store the oil containers in a cool, dry place, away from direct sunlight and sources of ignition. Ensure containers are properly sealed when not in use. Dispose of used engine oil responsibly at an authorized collection point.