Best current price£9.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.99Visit shop B&Q - Lever Action Left Cut Tin Snips 250mm Heavy Duty Steel Sheet Metal Cutter
Visit shop2 offers from £9.99 - £36.96
View price history by clicking the chart icon.
This guide is for professionals and DIY enthusiasts who need to cut sheet metal, aluminum, uPVC, and other materials with precision. The NWS Aviation Sheet Metal Snips provide clean cuts without burrs, thanks to their special cutting geometry and micro-serrated edges. Keep in mind that these snips are designed for specific materials and thicknesses; exceeding these limits may damage the tool.
| Model Part Number | 067L-15-250 |
|---|---|
| Brand | NWS |
These snips are suitable for cutting aluminum, sheet uPVC, wire mesh, leather, copper, and plastic.
The cutting edge hardness is 60-62 HRC.
Yes, these snips are made in Germany, ensuring professional quality.
Clean the blades after each use, lubricate the cutting edges and the screw joint periodically, and store the snips in a dry place.
Check the cutting edges for damage, ensure the screw joint is properly adjusted, and clean and lubricate the blades.
No, these snips are designed for specific materials and thicknesses. Exceeding these limits may damage the tool.
If the joint is too loose, tighten the screw. If it's too tight, loosen it slightly.
Check the cutting edges for damage or wear. Ensure the screw joint is properly adjusted. Clean and lubricate the blades. If the problem persists, the blades may need sharpening or replacement.
Check the spring catch for proper function. Clean and lubricate the joint and pivot points. Ensure the handles are not obstructed.
Ensure the material is within the snips' specifications. Apply more pressure while cutting and maintain a consistent cutting angle. Replace the snips if the cutting edge is damaged
No specific setup is required; the snips are ready to use out of the box. Ensure the screw joint is properly adjusted for optimal cutting performance. If the joint feels too loose, tighten the screw; if it's too tight, loosen it slightly. Check the spring catch to ensure it functions correctly.
The snips are compatible with a wide range of materials, including sheet metal, aluminum, uPVC, wire mesh, leather, copper, and plastic. However, they are not designed for cutting extremely thick or hardened materials. Always refer to the material specifications to ensure compatibility.
