Washing Machine Valve - Straight - 15mm x 3/4

The valve is constructed from a combination of brass, steel, and plastic for durability and performance.

This valve is designed specifically for 15mm copper pipe using a compression fitting. Use with PEX would require appropriate adaptors not included with the valve.

The valve comes with a blue lever for cold water and a red lever for hot water, ensuring easy identification.

The outlet is a standard 3/4" BSP threaded fitting, compatible with most common washing machine and dishwasher hoses.

The valve is designed for standard domestic water pressure. Consult the product specifications for exact pressure ratings if available.

You will need two wrenches to tighten the compression fitting securely. Ensure your pipe is prepared correctly for the compression connection.

Please refer to the product packaging or manufacturer's website for specific warranty information.

Ensure the 15mm pipe is clean, cut squarely, and deburred. Retighten the compression nut. Check the olive for damage and replace if necessary.

Verify that the main water supply is turned on and that the valve lever is in the open position. Check that the washing machine hose is securely attached to both the valve and the appliance.

Ensure you are using a standard 3/4" BSP hose. Hand-tighten the hose first, then use a wrench for a final snug turn. Do not overtighten.

Ensure no debris is obstructing the valve mechanism. If the issue persists after several smooth operations, contact customer support.