Fujifilm Instax Mini Heart Sketch Film - 10 Shots

Each pack contains 10 exposures, allowing you to take 10 instant photos.

This film is designed specifically for all Fujifilm Instax Mini series cameras. It is not compatible with Instax Square or Instax Wide cameras.

The prints are credit card-sized, with an image area of 62 x 46 mm and a film size of 86 x 54 mm.

After ejection, your photo will typically develop within 90 seconds, though full development can take up to a few minutes, especially in cooler temperatures.

While not strictly necessary unless specified by an expiry date warning, storing film in a cool, dry place is recommended. If you do refrigerate it, ensure it's brought to room temperature for at least 30 minutes before loading into the camera to prevent condensation.

Ensure you hold the camera steady when taking a picture. Check your camera's focusing range; most Instax Mini cameras have a fixed focus, but some have a macro mode for close-ups. Also, verify there's enough light, as low light can sometimes lead to blurry images if the shutter speed is too slow.

Check if the camera batteries are fresh and correctly inserted. Ensure the film cartridge is properly seated and the film compartment door is securely closed. If the dark slide has not been ejected yet, try pressing the shutter button again.

Ensure you are shooting in adequate lighting conditions. If indoors or in low light, make sure the camera's flash is enabled or consider using an external light source. Check if your camera has a brightness adjustment setting and set it to a brighter option.

Avoid shooting in overly bright conditions or directly into strong light sources (e.g., direct sunlight). If your camera has a brightness adjustment, set it to a darker option. Ensure the flash isn't firing unnecessarily close to your subject.

Do not force the cartridge. Gently open the film compartment door and try to remove it carefully. If it's still stuck, consult your camera's user manual or contact Fujifilm support. Do not open the film compartment while there is film inside, as this will expose the film and ruin remaining shots.

This usually indicates the film has been exposed to light before being used (e.g., opening the film compartment with film inside) or a camera malfunction. Ensure the film compartment is always sealed until the cartridge is empty. If the issue persists with a new pack of film, the camera may require servicing.