Wheelbarrow Wheel - Yellow

Currently unavailable

Currently unavailable
This durable, 10-inch solid rubber wheelbarrow tire from SPARES2GO is designed for users needing a puncture-proof and reliable replacement for wheelbarrows and trolleys. Its key benefit is its solid, tubeless construction, eliminating the risk of flats and frequent maintenance. A potential caveat is its universal fit; while versatile, precise compatibility with very specific axle types should be confirmed.
| Colour | Yellow |
|---|---|
| Model Part Number | Universal |
| Brand | SPARES2GO |
Yes, as it is made of solid rubber and is tubeless, it cannot be punctured by nails, thorns, or other sharp objects like pneumatic tires can.
The wheel has a diameter of 10 inches (approximately 250mm).
It is designed as a universal replacement for most standard 10-inch wheelbarrow and trolley axles. However, it's recommended to measure your current wheel and axle to ensure compatibility.
No, this is a tubeless wheel and does not require an inner tube.
A solid rubber tire provides a firmer ride with less shock absorption compared to an air-filled tire. It is more durable but less cushioned.
You can clean the wheel with a damp cloth and mild soap if necessary. Ensure it is dry afterwards.
This wheel requires minimal maintenance. Periodically check that it is securely attached to the axle and that the axle itself is clean and greased.
Ensure the axle nut is tightened securely. Check for any missing washers or spacers on the axle.
Verify that the wheel is not rubbing against the frame or other components. Clean and lubricate the axle if it appears stiff.
Confirm that the wheel bore diameter matches your axle diameter. If the fit is slightly off, consider using appropriate shims or consulting a hardware professional for a precise fit.
Check for debris caught around the axle or wheel. Ensure the axle is properly greased.
Setup: To install the wheel, you will typically need to remove the old wheel by undoing the axle nut and washer. Slide the old wheel off the axle, ensuring any spacers are retained. Slide the new 10-inch solid rubber wheel onto the axle, replacing any original spacers. Secure the wheel with the washer and axle nut. Ensure the wheel spins freely but without excessive wobble.
Compatibility: This wheel is designed as a universal replacement for most standard 10-inch wheelbarrow and trolley axles. However, always measure your existing wheel diameter and axle width to confirm compatibility. Check the diameter of the wheel bore to ensure it matches your axle.
Care: Due to its solid rubber construction, this wheel requires minimal care. It is resistant to punctures and tears. Periodically check that the axle is clean and lubricated, and that the wheel is securely fastened. Wipe down with a damp cloth if it becomes dirty. Avoid prolonged exposure to extreme temperatures or harsh chemicals, which could degrade the rubber over time.