Best current price£3.82from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£3.82Visit shop Sika White Forever Powder Wall Tile Grout 1.2 Kg
Visit shop
B&Q£13.06Visit shop B&Q - Sika 852168 Forever White Wall Tile Grout 1.2Kg Evb2160
Visit shop6 offers from £3.82 - £13.06
View price history by clicking the chart icon.
For DIYers and renovators looking for a durable, water-resistant grout solution for interior wall tiles, the Everbuild Forever White Powder Wall Tile Grout offers a simple mix-with-water application and long-lasting mould protection. While it excels in wet areas like showers and kitchens, its suitability is limited to joints up to 3mm and interior use only.
| Colour | White |
|---|---|
| Model Part Number | FWPOWGROUT1 |
| Brand | Sika |
No, this product is specifically designed for interior wall tile applications and is not suitable for floor tiling.
The maximum recommended joint width for this grout is 3mm.
The grout typically begins to set within 15-30 minutes after application, but full curing times should be checked on the product packaging.
No, this grout is for interior use only.
The grout contains an anti-fungal compound that actively inhibits the growth of bacteria, mildew, and mould, helping to prevent discolouration and maintain a clean finish.
It is recommended to only mix the amount of grout that can be used within its pot life (typically 30-60 minutes) to ensure optimal working consistency and performance.
Mild detergents are recommended. Avoid using abrasive cleaners, as they can damage the grout surface over time.
Add a small amount of water and re-mix thoroughly. Ensure you are adding the correct water ratio as per the packaging instructions.
Add a small amount of grout powder and re-mix. Ensure you are not adding too much water during the mixing process.
Ensure tiles are wiped down with a damp (not wet) sponge shortly after application. If haze has dried hard, try a slightly damp cloth, or consult the product manufacturer for specific haze removal advice.
This may indicate mixing too dry or an excessively deep joint. Ensure joints are adequately filled and the correct water ratio is used.
Preparation:
Ensure all tile surfaces are clean, dry, and free from dust and debris before application. Remove any excess tile adhesive.
Mixing:
Carefully mix the powder with clean water according to the manufacturer's instructions on the packaging. Aim for a smooth, lump-free paste. Avoid mixing more than can be used within the pot life.
Application:
Apply the mixed grout to the tile joints using a grout float, pressing it firmly into the gaps to ensure they are completely filled. Work in manageable sections.
Cleaning:
Wipe away excess grout from the tile surface with a damp sponge. Rinse the sponge frequently. After the grout has begun to set (typically 15-30 minutes), polish the tiles with a clean, dry cloth to remove any haze.
Compatibility:
Suitable for use with most types of wall tiles for interior applications with joints up to 3mm wide. Not recommended for floor tiling or exterior use.
Care:
Clean tiled areas with mild detergents. Avoid abrasive cleaners that could damage the grout. Regular cleaning helps maintain the mould-resistant properties.
