Best current price£7.87from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£7.87Visit shop Polypipe Polymax Branch & One End Reduced Tee 22Mm X 15Mm X 15Mm Max1522 White
Visit shop
B&Q£9.52Visit shop - Polypipe Polymax Branch And One End Reduced Tee White 22X15X15mm Max1522
Visit shop2 offers from £7.87 - £9.52
View price history by clicking the chart icon.
This Polypipe PolyMax tee fitting is designed for plumbers and DIY enthusiasts needing a reliable and aesthetically pleasing solution for connecting hot and cold water systems, particularly in surface-mounted applications. Its key benefit is the secure, push-fit design that allows for quick installation and easy demounting with a special tool, while its slim profile makes it ideal for visible pipework. A potential caveat is the need for the specific release tool for disassembly.
| Model Part Number | MAX1522 |
|---|---|
| Brand | Polypipe |
The main advantage is its quick and secure push-fit installation, which is faster than traditional methods and ideal for visible pipework due to its slim, attractive design.
No, this fitting is specifically designed for use with polybutylene pipes of 22mm and 15mm diameters.
You need to use a specific Polypipe release tool. Insert the tool into the slots on the fitting and push towards the pipe while pulling the pipe out.
While compatible with hot water systems, always check the specific pressure and temperature requirements for underfloor heating systems against the product's rated capabilities. This fitting is generally intended for standard domestic hot and cold water applications.
It means the tee has a main branch connection (e.g., 22mm) and then one side of the tee is reduced to a smaller size (e.g., 15mm), while the other side of the tee is also reduced to the same smaller size (e.g., 15mm).
Yes, the fitting is designed to be demountable and reusable, provided it has not been damaged during removal or installation and the O-rings remain in good condition.
This fitting is suitable for hot and cold water systems. For precise operating temperature and pressure limits, consult the official Polypipe PolyMax product specifications.
Ensure the pipe is fully inserted into the fitting and has reached the internal stop. Check that the pipe end is cut clean, square, and free of burrs. Verify the pipe is compatible with the fitting and has not been deformed.
Make sure the pipe end is clean, round, and not damaged. Ensure the fitting's internal O-ring is clean and free of debris. Slight lubrication with water can sometimes help, but avoid oils or silicones.
Confirm you are using the correct Polypipe release tool designed for this fitting. Ensure the tool is fully inserted into the release slots. Make sure the pipe is not stressed or at an angle that prevents release. The system should be depressurized.
The pipe may not have been fully inserted. Depressurize the system, release the fitting using the tool, and re-insert the pipe until it is fully engaged and secured.
Setup:
Compatibility:
Care:
