Contact Adhesive - 5L - Bond it
Best current price£62.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£62.99Visit shop B&Q - Contact Adhesive Premium Solvent Based Glue 5 Litres
Visit shopB&Q£62.99Visit shop One Offer
1 offer from £62.99
View price history by clicking the chart icon.
B&QB&Q - Contact Adhesive Premium Solvent Based Glue 5 Litres
Free delivery in 1–3 days
£62.99
Visit shop
Product Information
Full details
This guide is for anyone using Bond It Contact Adhesive. The key benefit is its ability to create strong bonds across various materials. A potential caveat is the need for proper ventilation during application due to its solvent-based nature. This adhesive is a single-component, solvent-based solution designed for robust bonding of numerous materials including wood, metals, plastics, and more.
All features
| Brand | Bond it |
|---|
Extended Product Information
FAQs
What materials can I bond with this adhesive?
This adhesive is suitable for bonding cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics (e.g. Formica), dense textiles, plaster, stone, concrete, cementitious screeds, smoothing compounds, rigid PVC and uPVC sheets.
Is ventilation necessary when using this product?
Yes, due to the solvent-based nature of the adhesive, it's essential to use it in a well-ventilated area to avoid inhaling vapors.
How long does it take for the adhesive to dry?
The adhesive typically becomes touch dry within 10-20 minutes, but drying times can vary based on temperature and humidity.
Can this adhesive be used on vertical surfaces?
Yes, it can be used to bond lightweight materials to vertical surfaces and ceilings.
What is the shelf life of the adhesive?
Shelf life can vary, but it's best to use the adhesive within the manufacturer's recommended timeframe, typically indicated on the product packaging.
What should I do if the adhesive gets on my skin?
Wash the affected area immediately with soap and water. If irritation persists, seek medical advice.
Is this adhesive suitable for outdoor use?
While the adhesive can withstand certain environmental conditions, it is best suited for indoor use and sheltered applications. Prolonged exposure to extreme weather conditions may affect its performance.
Troubleshooting
Weak bond or bond failure.
Ensure surfaces were properly prepared and cleaned. Check that enough adhesive was applied and allowed to become touch dry before bonding. Apply sufficient pressure when joining surfaces.
Adhesive not sticking to certain materials.
Verify material compatibility. Rough up non-porous surfaces for better adhesion. Test in an inconspicuous area before full application.
Slow drying time.
Check environmental conditions (temperature, humidity). Ensure adequate ventilation for solvent evaporation. Apply a thinner coat of adhesive.
Pros and Cons
Pros
- Wide material compatibility, including wood, metal, and plastics.
- Strong and durable bonds are achieved.
- Easy to apply due to the single-component formula.
- Suitable for both horizontal and vertical applications.
- Provides a reliable solution for various bonding needs.
Cons
- Requires adequate ventilation due to the solvent-based nature.
- Solvents may attack certain plastics, such as PVC/uPVC. Requires pre-testing.
- Bonding process requires accurate alignment, as adjustments are difficult once contact is made.
- May require more time to cure than some alternative adhesives.
- Not suitable for all materials; always test for compatibility.
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose particles. Lightly roughening the surfaces can enhance adhesion.
- Application: Apply a thin, even layer of adhesive to both surfaces being bonded. Allow the adhesive to become touch dry (usually 10-20 minutes) before joining the surfaces.
- Bonding: Carefully align the surfaces and press them firmly together. Apply consistent pressure across the entire surface area. The bond's strength depends on the pressure applied.
- Compatibility: This adhesive bonds well with many materials but is not universally compatible. Always test on a small, inconspicuous area before large-scale use, especially with plastics. Avoid use with materials that are not listed in the product description. It is not suitable for applications involving prolonged exposure to water or high temperatures.
- Care: Store in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed when not in use. Avoid prolonged skin contact and inhalation of vapors; use in a well-ventilated area.