Best current price£6.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.50Visit shop B&Q - Worx-Type Grass Strimmer Spool & Dual Line 1.6mm X 4.8MCompatible Replacement For Wa0007Ufixt
Visit shop1 offer from £6.50
View price history by clicking the chart icon.
This Ufixt WA0007 dual line replacement spool is for owners of compatible WORK grass strimmers and trimmers needing a reliable cutting line. Its key benefit is providing a direct, non-genuine replacement for the original part number, ensuring your tool continues to function efficiently. A potential caveat is that it's a non-genuine part, so performance may vary slightly from the original.
| Model Part Number | WA0007 |
|---|---|
| Brand | Ufixt |
No, this is a non-genuine replacement spool and line from Ufixt, designed to be compatible with specific WORK models.
The line measures 1.6mm in diameter and the spool contains 4.8m of line.
Replacement frequency depends on usage. When the line is fully depleted or you experience a significant drop in cutting performance, it's time to replace the spool.
No, this spool is specifically designed for the WORK models listed: WG105, WG106, WG108, WG109, WG112, WG113, WG115, WG116, WG117, WG118, WG119, and WG124. Always verify your model number.
If the line becomes tangled, switch off the strimmer and manually untangle it. Ensure the line is feeding smoothly before resuming operation.
Most compatible WORK strimmers feature an auto-feed system. Tap the strimmer head gently on the ground during operation to release more line as needed.
Ensure the spool is correctly seated in the strimmer head and the line ends are properly threaded through the eyelets. Check for any tangles or knots in the line.
The spool may not be installed correctly, or the line may be unevenly wound. Ensure the spool cover is securely fastened. Check that both lines are feeding out at a similar rate.
The line may be worn down. Tap the strimmer head on the ground while in operation to automatically advance the line. If the line is depleted, replace the spool.
Check that no line is trapped or obstructing the cover. Ensure the spool is correctly oriented and fully seated within the strimmer head.
Setup:
Compatibility:
This spool is a replacement for part number WA0007 and is compatible with the following WORK models:
Always double-check your strimmer's model number and refer to its manual to confirm compatibility before purchasing.
Care:
