Best current price£102.01from eBay
Shopping.co.uk recommended and popular offers
eBay£102.01Visit shop Hager UD32B1 DIN Rail Kit, 450x500mm, Horizontal, 6x12 Module
Visit shop3 offers from £102.01 - £213.52
View price history by clicking the chart icon.
The Hager Univers Installation Unit (UD32B1) is designed for electricians and system integrators building low-voltage distribution and switching device combinations up to 1600 A. Its key benefit is providing a robust and compliant foundation for modular components, ensuring safety and reliability. A potential caveat is its specific dimension requirements for panel integration. This unit offers a standard sealable, touch-protected enclosure with reinforced quick-locking covers, adhering to VDE standards for safe and professional electrical installations.
| Model Part Number | UD32B1 |
|---|---|
| Brand | HAGER |
The Hager UD32B1 is designed for the construction of low-voltage distribution and switching device combinations up to 1600 A.
It complies with VDE standards in accordance with DIN EN 61439, parts 1, 2, and 3 (VDE 0660, parts 600, 1, 2, and 3).
The unit features 6 DIN rails, and each DIN rail supports 12 modular spacings, allowing for a total of 72 modular units (assuming standard 18mm module width).
The panel dimensions are 450mm in height and 500mm in width, with a depth of 125mm.
The product description does not specify outdoor rating. It is designed for use within distribution boards and switchgear combinations, typically in indoor, controlled environments.
It comes with standard sealable touch-protection covers, reinforced using four quick-locking bolts each. It has a notch for cable entry/access.
Ensure the DIN rails are correctly installed and not warped. Check that the modular devices are standard 35mm DIN rail compatible and are being clipped on correctly.
Verify that all internal wiring and components are neatly arranged and not obstructing the cover. Ensure the quick-locking bolts are properly aligned before attempting to lock.
Double-check all wiring connections for tightness and correctness according to the schematic. Ensure the total load does not exceed the 1600 A rating and that all components used are VDE compliant.
Setup: Installation of the Hager UD32B1 requires mounting within a compatible distribution board enclosure with dimensions of 450mm (height) x 500mm (width). Ensure the enclosure is rated for the electrical load. Modular devices are then mounted onto the provided DIN rails, following standard electrical wiring practices. Secure the touch-protection covers using the quick-locking bolts.
Compatibility: This unit is designed for modular switching devices compatible with standard DIN rail mounting (35mm top hat rail). It is intended for use in low-voltage AC systems up to 690 V / 50 Hz.
Care: The installation unit itself requires minimal care once installed. Regular inspection of the installed modular devices and their connections is recommended as part of routine electrical maintenance. To clean the exterior or accessible parts, use a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents.
