Pisces 10m Corrugated Flexible Hose - Black

The internal diameter of the Pisces 10m Corrugated Flexible Hose is 1.5 inches (38mm).

Two adjustable stainless steel double wire clips are included with the hose.

This hose is designed for garden and aquatic use, not for potable drinking water.

The hose is made of UV-resistant plastic and is suitable for aquatic or marine setups, implying it can handle general water transfer, but prolonged direct saltwater immersion should be considered based on specific marine application needs.

You can use a sharp knife or sturdy scissors to cut the hose cleanly to your desired length.

While black absorbs more heat, the effect on water temperature within a 10m hose is typically minimal, especially in typical garden pond or water butt applications. The primary purpose of the black color is to deter algae growth.

Yes, you can connect multiple hoses together using appropriate fittings and secure clamps, though this guide focuses on the single 10m length provided.

Gently straighten the hose. The corrugated design is flexible, but sharp, prolonged bends can still impede flow. Ensure the hose is not placed over any sharp objects that could cause a permanent crease.

Ensure the hose clip is tightened sufficiently. Check that the hose is fully seated onto the fitting and that there are no obstructions or debris on the fitting surface. If the leak persists, the hose may be damaged at that point, or an additional clip may be needed.

Disconnect the hose and flush it thoroughly with clean water. For stubborn growth, a mild, pond-safe cleaning solution can be used, followed by extensive rinsing. Ensure connections are secure before reconnecting.

Allow the hose to warm up slightly in sunlight, as plastic can become more flexible in warmer temperatures. Ensure you are not trying to make a bend that is too sharp for the hose's design.