Neilsen 4pc 600mm Long Auger Wood Bit Set - 8mm, 12mm, 16mm, 24mm

These bits are designed for use with hardwoods, softwoods, and timber.

These bits are compatible with most standard drills. Ensure the drill chuck can accommodate the bit's shank size.

Start with the spur tip firmly placed, and maintain a perpendicular angle to the wood surface. A pilot hole can also help.

Clean the bits after each use with a brush or cloth to remove debris. Store them in a dry place and apply a light coat of oil to prevent rust.

The spur tip provides a clean and accurate start to the drilling process, minimizing wandering and splintering.

Reduce the drilling speed. Withdraw the bit slightly to clear wood shavings. If it remains stuck, use a wrench to remove it from the drill.

Yes, these bits are built to professional standards and designed for carpentry, joinery, fencing, and framing work.

Ensure the drill is perpendicular to the wood surface. Start with a pilot hole or apply firm, even pressure. Check that the spur tip is sharp.

Reduce drilling speed. Withdraw the bit slightly to clear the wood shavings. If necessary, use a wrench to remove the bit from the chuck.

Reduce drilling speed. Ensure the bit is appropriate for the wood type (hardwoods require slower speeds). Check for any damage or wear on the cutting edges.