Diall Nail-In Glide - Grey

These glides are best suited for solid wood, plastic, or metal furniture legs. They provide a durable surface for movement on hard floors.

While they may prevent some snagging compared to unprotected legs, these glides are primarily designed for hard flooring. They may not provide the intended ease of movement on thick carpet.

You should consider replacing the glides if they become loose, fall off, are significantly worn down, or if the furniture starts making noise or scratching the floor again.

The main benefit is twofold: they protect your floors from scratches and damage caused by furniture movement, and they significantly reduce the noise associated with moving furniture.

They can be used on antique furniture with solid legs, but it's advisable to test the installation on an inconspicuous area first to ensure it doesn't damage the wood. A gentle hammering technique is crucial.

It means the glides are designed to be secured to the furniture leg by hammering a nail or pin, which is part of the glide itself, into the material of the leg.

The grey color is generally neutral and designed to be discreet, blending well with various furniture leg colors and styles on hard flooring.

Remove the glide and re-hammer it, ensuring it is centered and fully seated on the furniture leg. If the hole in the furniture leg is too large, consider a slightly larger glide or a wood filler/adhesive for a secure fit.

Check if all glides are installed correctly and are level. Ensure there are no obstructions on the glide surface. The furniture might be unbalanced, causing uneven pressure; check the furniture itself.

Ensure the leg is made of a material suitable for nailing. If the wood is very hard, pre-drilling a small pilot hole (smaller than the nail) might help, but be cautious not to split the wood. Use firm, direct blows with the hammer.

The original attachment point may have been compromised. Clean both the furniture leg and the glide. Re-hammer the glide, ensuring it is firmly seated. For a more permanent fix on older furniture, consider using a small amount of wood glue or epoxy before hammering.