PowerTec Paintless Dent Repair Tool - 92662
Best current price£540.00from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£540.00Visit shop POWER-TEC 92662 Paintless Dent Repair Tool Auto Body Repair Kit Set (INC VAT)
Visit shopeBay£540.00Visit shop All Offers
4 offers from £540.00 - £752.43
View price history by clicking the chart icon.
eBayPOWER-TEC 92662 Paintless Dent Repair Tool Auto Body Repair Kit Set (INC VAT)
Free delivery in 1–3 days
£540.00
Visit shop
Power-TEC Paintless Dent Repair Tool 92662Free delivery in 1–3 days£607.01Visit shop →
Power-TEC Paintless Dent Repair Tool 92662Free delivery in 1–3 days£611.71Visit shop →
POWER-TEC 92662 Paintless Dent Repair Tool PDR Auto Body Repair Kit SetFree delivery in 1–3 days£752.43Visit shop →
Product Information
Full details
The PowerTec Paintless Dent Repair Tool (92662) is designed for automotive professionals and DIY enthusiasts looking to quickly remove minor dings and soft dents from steel vehicle panels. Its primary benefit is the rapid repair time of approximately 30 seconds per dent, achieved through induction heating. A key caveat is that this tool is exclusively for use on steel panels and should not be applied to aluminum.
All features
| Model Part Number | 92662 |
|---|---|
| Brand | PowerTec |
Extended Product Information
FAQs
Can this tool be used on plastic bumpers?
No, this tool is designed for metal panels, specifically steel. It is not intended for use on plastic components.
What is the maximum power output?
The tool has an output power of 400W, with adjustable power control from 10% to 100%.
How long is the power cable?
The main unit's power cable is 1.5 meters long, and the repair head cable is 3 meters long.
Is this tool safe for painted surfaces?
When used correctly with appropriate time and power settings, it is designed to repair dents without damaging the paint. However, improper use, such as overheating or using on non-steel surfaces, can cause paint damage.
What type of dents is this tool best for?
It is most effective for soft dents and minor dings on steel panels that have not creased or stretched the metal significantly.
Does it require any consumables?
No, the tool is mains-powered and does not require specific consumables for operation, only electricity.
What are the dimensions of the repair head?
The product information does not specify the exact dimensions of the repair head, but it is designed for targeted induction heating of dents.
Troubleshooting
Tool not heating or producing sufficient heat
Check that the tool is properly plugged into a working 230v outlet. Ensure the repair head cable is securely connected. Verify that the power and time settings are appropriately adjusted for the repair task.
Digital display is not functioning
Disconnect the tool from the power source, wait 30 seconds, and reconnect. If the issue persists, contact customer support.
Dent not fully repairing after multiple attempts
Confirm the panel is made of steel. Very sharp or creased dents may not be suitable for this method. Ensure you are not overheating the area, which can cause paint damage. Adjust time and power settings for a gentler approach.
Overheating of the repair head
Allow the tool to cool down between prolonged use cycles. Ensure adequate ventilation around the unit. Reduce the power or time settings if you notice excessive heat buildup.
Pros and Cons
Pros
- Fast repair times for minor dents.
- Precise control over power and time settings.
- Suitable for professional workshop use.
- Simple operation with a clear digital display.
- Reduces the need for traditional body filler and sanding on steel panels.
Cons
- Not suitable for aluminum panels.
- Effectiveness may be limited on sharp or deep dents.
- Requires a standard 230v power outlet.
- Potential for heat damage if used improperly or on sensitive areas.
Setup, Compatibility & Care
Setup:
- Ensure the tool is connected to a stable 230v single-phase power outlet.
- Connect the 3-meter repair head cable to the main unit.
- Verify the power cable (1.5m) is securely plugged in.
Compatibility:
- Steel Panels Only: This tool is designed specifically for repairing dents on steel automotive body panels.
- Not for Aluminum: Do NOT use on aluminum panels, as the induction heating process can cause irreparable damage.
Care:
- Keep the repair head and cables clean and free from debris.
- Store the unit in a dry, protected environment when not in use.
- Wipe the exterior with a slightly damp cloth if needed; avoid abrasive cleaners.