Best current price£32.66from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£32.66Visit shop Jeyes Driveway, Concrete & Masonry Sealer 5L ? Fast-Drying Block Paving Sealer For Lasting Protection ? Paving, Blockwork & Patio Sealant ? Creates 5000185118236
Visit shop1 offer from £32.66
View price history by clicking the chart icon.
The Jeyes Driveway, Concrete & Masonry Sealer 5L is designed for homeowners looking to protect and enhance their outdoor paved surfaces, offering a fast-drying, water-based solution to lock out dirt and water. While it provides excellent protection for block paving, driveways, and patios, users should ensure application on a dry surface for optimal results. Key features include long-lasting protection, a water-based formula, and coverage for up to 25m².
| Brand | Jeyes |
|---|
The sealer is fast-drying. Typically, light foot traffic is possible after a few hours, but full curing can take 24-48 hours, depending on temperature and humidity.
The 5L container covers up to 25m², depending on the porosity and texture of the surface being treated.
While primarily designed for concrete and block paving, it may be suitable for some types of natural stone. It is recommended to test on an inconspicuous area first to ensure compatibility and desired finish.
As it is water-based, spills and tools can be cleaned with soap and water while the product is still wet. Dried product may require more effort to remove.
The sealer is designed to provide protection without drastically altering the appearance, but it may enhance the color or give a slightly darker, 'wet look' finish to some surfaces. Always test in a small area first.
The need for reapplication depends on environmental factors, traffic, and wear. Typically, the protection can last for several years, but reapplication might be considered when water no longer beads on the surface.
This can happen if the surface was not evenly porous or if the application was inconsistent. Ensure thorough, even coverage during application and consider a second coat on more absorbent areas.
The surface may not have been dry enough during application, or the product may not have fully cured. Allow more drying time, ensuring good ventilation. If issues persist, a reapplication on a thoroughly dry surface may be necessary.
This could be efflorescence from the masonry or a result of the sealer not fully penetrating or curing properly, potentially due to moisture. Ensure the masonry is dry before application and that the sealer has adequate drying conditions. In some cases, scrubbing with a stiff brush may help, followed by rinsing and drying.
Setup: Ensure the surface to be treated is clean, dry, and free from moss, algae, and loose debris. Sweep or pressure wash the area and allow it to dry completely (typically 24-48 hours in dry weather). Test the sealer on an inconspicuous area first to check for desired appearance. Apply using a brush, roller, or sprayer, ensuring even coverage. Avoid applying in wet weather or when rain is forecast.
Compatibility: This sealer is designed for use on concrete, block paving, and other masonry surfaces. It is not suitable for asphalt, painted surfaces, or natural stone unless specifically tested and deemed compatible.
Care: Once sealed, surfaces are easier to clean. Regular sweeping and occasional washing with water are usually sufficient. Avoid harsh chemical cleaners that could degrade the sealant. Reapplication may be needed every few years, depending on traffic and weather exposure.
