Vision Koski Grey Zipped Stockingfoot Waders - MPN: 26A0036SFTXXL

You will need wading boots designed for stockingfoot waders. These are separate from the waders themselves and should fit over the integrated neoprene feet.

Regularly rinse the zip with fresh water after use. Periodically clean it with a soft brush and apply a specialized zipper lubricant to ensure smooth operation and longevity.

The neoprene feet provide some insulation. For very cold conditions, you will need to wear appropriate thermal layers underneath.

It means the Durable Water Repellent (DWR) coating on the waders is made without perfluorinated chemicals, which are considered harmful to the environment.

It is not recommended to machine wash these waders. Hand washing with fresh water and mild soap, followed by air drying, is the best method for care.

The T4™ fabric is designed for durability, and the lower section of the waders is further reinforced to withstand abrasion and wear from rough terrain.

The curved No Seam™ design contours to the natural shape of the leg, providing a better fit, reducing potential friction points, and enhancing overall comfort during movement.

Rinse the zip thoroughly with fresh water to remove debris. Ensure it is dry, then apply a small amount of specialized zipper lubricant. Check for any fabric caught in the zip teeth.

Ensure the waders are completely air-dried inside and out before storage. Hang them in a well-ventilated area and check the inner seams for moisture.

Ensure your wading boots are securely laced and providing enough tension to hold the gravel guards down. Some boots have lace hooks specifically for this purpose.

Inspect the fabric for any visible tears or punctures, especially in the reinforced lower section. Contact customer support if the fabric integrity is compromised, as re-waterproofing may be needed.