Roland Interconnect Cable - 1/4Inch TRS-1/4Inch TRS, Balanced - Black

TRS stands for Tip, Ring, and Sleeve. It indicates a balanced connector type for 1/4-inch (6.35mm) plugs, which uses three conductors to carry the audio signal, helping to reduce noise and interference compared to unbalanced TS (Tip-Sleeve) cables.

This is a balanced mono cable. It is designed for mono signals that benefit from balanced transmission, such as line-level outputs from instruments, preamps, or mixers.

While you can technically plug a TRS connector into a TS jack, it's not recommended for optimal performance. Using a balanced TRS cable with an unbalanced TS input might result in improper signal routing or increased noise. For unbalanced connections, a TS cable is generally preferred.

Oxygen-free copper (OFC) is used in high-quality audio cables because its purity minimizes signal loss and distortion over the length of the cable, leading to a clearer and more accurate sound transmission.

The high-density spiral shielding creates a barrier that effectively blocks out electromagnetic and radio frequency interference (EMI/RFI). This prevents unwanted noise like hum and buzz from entering the audio signal, especially crucial in environments with many electronic devices.

A low-capacitance design helps preserve the high-frequency content of your audio signal, ensuring that your instrument's tone sounds bright and natural, with maximum dynamic range. This is particularly important for guitars and keyboards where tonal nuances are critical.

Ensure both 1/4-inch TRS connectors are fully inserted into the jacks. Check that the connected devices are powered on and configured correctly. Try a different cable to isolate the issue.

Confirm you are using a balanced connection on both ends. Ensure the cable is not positioned near power sources or other potential sources of interference. Try moving the cable away from other electronic equipment.

Inspect the connectors for dirt or damage. Ensure the cable is not physically damaged (e.g., cuts, severe kinks). Check that the connected equipment is functioning correctly.