Best current price£13.95from Joybuy UK
Shopping.co.uk recommended and popular offers
Joybuy UK£13.95Visit shop Katur Hir2 Led Headlight Bulbs, 26000Lm 80W 9012 Led Bulb 6000K White Fanless Waterproof Mini Size Plug And Play, Pack Of 2 6164313013783
Visit shop1 offer from £13.95
View price history by clicking the chart icon.
The KATUR 9012 HIR2 LED Headlight Bulbs are ideal for drivers looking to replace dim halogen lights with high-performance, crisp illumination. These bulbs provide a massive leap in visibility with 26000 lumens and a 6000K white light, making nighttime driving safer and less fatiguing. While they offer exceptional brightness and a simple installation, potential buyers should verify their vehicle's specific housing compatibility to ensure the beam pattern remains properly aligned for oncoming traffic.
| Model Part Number | 9012 |
|---|---|
| Brand | Katur |
These bulbs are intended for off-road or performance use in many jurisdictions. Always check local laws regarding aftermarket headlight modifications.
No, these are plug-and-play bulbs with an integrated driver, so no external ballasts or complex wiring is required.
If your vehicle uses the 9012 or HIR2 socket type, these bulbs are designed for a universal fitment.
Use a clean, dry microfiber cloth to wipe the surface. Do not use liquid cleaners or solvents on the LED chips.
No, the internal construction is engineered to dissipate heat effectively through the bulb body, ensuring it runs within safe temperature ranges without a fan.
Check the polarity. LED bulbs are orientation-sensitive; try unplugging the connector, flipping it 180 degrees, and plugging it back in.
Your vehicle's electrical system may require a higher load. Install an external resistor or CANbus decoder to stabilize the power signal.
Ensure the bulb is seated correctly in the socket and verify the alignment of your headlight beam height using your vehicle manual's adjustment screws.
Installation of the KATUR 9012 bulbs is straightforward due to the integrated design.
To care for your bulbs, avoid touching the LED chips with bare hands, as skin oils can cause hot spots and premature failure. If you encounter warning lights on your dashboard after installation, you may need a separate CANbus error-canceler (not included).
