Best current price£4.91from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£4.91Visit shop Timco Nozzles For Chemical Resins Bag 10 Tnoz10
Visit shop3 offers from £4.91 - £9.44
View price history by clicking the chart icon.
The TIMco Nozzles for Chemical Resins (TNOZ10) are designed for professionals and DIYers undertaking resin bonding tasks. They offer precise mixing and efficient application with a unique mixing design and low extrusion force, compatible with 300ml and 410ml cartridges. A key benefit is the ability to store and reuse partially used resin, minimizing waste. However, their 175mm length may be less ideal for very confined spaces.
| Model Part Number | TNOZ10 |
|---|---|
| Brand | TIMco |
While designed for reuse by sealing unused resin, hardened or contaminated resin can make cleaning difficult. It is often more practical to use a fresh nozzle for new projects after storing resin.
The 175mm length provides extended reach, allowing easier access to deeper holes or awkward-to-reach areas for precise resin application.
These nozzles are specifically designed for two-part chemical resins typically supplied in dual-cartridge systems. Always check compatibility with your specific resin product.
After application, carefully cap the end of the nozzle or leave a small amount of mixed resin in the tip to harden, acting as a plug. Follow the resin manufacturer's specific storage recommendations.
Low extrusion force means less physical effort is required to dispense the resin, reducing hand fatigue during prolonged use or for users with less grip strength.
Each pack contains 10 TIMco Nozzles for Chemical Resins.
Ensure the nozzle is fully seated on the cartridge and that both resin components are being dispensed evenly. Check for blockages within the mixing element.
Verify you are using a compatible 300ml or 410ml cartridge. Ensure the cartridge opening is clean and free of debris.
Check the dispenser or caulking gun for adequate force. Ensure there are no hardened resin blockages in the nozzle tip or mixing chamber. Try a fresh nozzle if necessary.
Ensure the nozzle is securely fastened to the cartridge. If the leak persists, the cartridge or nozzle seal may be compromised; replace the nozzle.
Setup:
Compatibility:
The TNOZ10 nozzles are designed to fit standard 300ml and 410ml dual-component chemical resin cartridges. They are suitable for use with most standard caulking guns or dispensers designed for these cartridge sizes.
Care:
