Best current price£95.15from eBay
Shopping.co.uk recommended and popular offers
eBay£95.15Visit shop Upol PLAS/5DG Plast X DARK GREY PAINT Plastic Bumper Trim Aerosol Can U-Pol X 6
Visit shop2 offers from £95.15 - £103.30
View price history by clicking the chart icon.
U-Pol PlastX is a high-performance top coat specifically formulated for automotive enthusiasts and professionals looking to restore weathered plastic bumpers and trim components. The primary benefit of this paint is its ability to provide a smooth, durable, professional-grade satin finish that adheres exceptionally well to correctly primed plastic surfaces. While it offers excellent coverage and quick drying times, it is important to note that success relies heavily on proper surface preparation and the application of an appropriate plastic primer before use.
| Colour | Grey |
|---|---|
| Model Part Number | PLASTX Plastic Bumper and Trim Top Coat Paint |
| Brand | U-Pol |
No, for best results and proper adhesion, the surface should be cleaned, sanded, and treated with a plastic-specific primer.
PlastX is specifically formulated for plastic bumpers and trim; it may not provide the same durability or adhesion characteristics on bare metal.
Usually, two medium coats are sufficient for full coverage, allowing appropriate flash time between coats.
While intended for exterior use, it can be used on interior plastics; however, ensure you test on an inconspicuous area first.
This product produces a professional satin finish, which is neither overly glossy nor completely matte.
This is likely due to improper surface cleaning or lack of an adhesion promoter; sand the area back and ensure the surface is degreased before re-priming.
Ensure you are applying light, even coats and overlapping your passes by 50% to maintain consistency.
Check your working environment; low temperatures or high humidity can significantly increase drying times.
To ensure success, the plastic component must be thoroughly cleaned with a grease and wax remover before sanding. Always apply an appropriate plastic adhesion promoter or primer to the substrate before spraying the PlastX top coat. Ensure you work in a well-ventilated area with consistent ambient temperatures for optimal curing. For ongoing care, once fully cured, standard automotive mild detergents are sufficient to keep the finish clean. Avoid using harsh solvents or high-pressure power washers directly on the painted area to maintain the longevity of the finish.
