Best current price£51.72from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£51.72Visit shop Freefoam Light Pvc Rigid Angle - 50Mm X 5Mtr Oak Woodgrain
Visit shop2 offers from £51.72
View price history by clicking the chart icon.
The PVC Rigid Angle 50mm in Beige is an essential finishing component for DIY enthusiasts and trade professionals looking to achieve clean, durable edges in various internal and external applications. This versatile trim provides a professional look to corners and joints, offering high resistance to environmental wear; however, users should note that as a rigid product, it does not flex and requires precise measurements before installation to ensure a seamless fit.
| Colour | Beige |
|---|---|
| Model Part Number | FZR50WGO |
| Brand | Freefoam |
Yes, the material is designed to be durable and resistant to weathering, making it suitable for both indoor and outdoor use.
You can use silicone sealant, grab adhesive, or superglue depending on the substrate you are bonding to.
While PVC is generally low-maintenance and does not require painting, it can be painted if necessary using a specialized PVC primer and paint.
For the best finish, use a mitre block to cut 45-degree angles so that the two pieces meet perfectly at the corner.
PVC can experience minor thermal expansion. When installing over long runs, ensure you allow for very slight gaps at ends if exposed to extreme temperature fluctuations.
Ensure the surface is completely clean and free of grease or debris before application. Use a professional-grade grab adhesive.
Use a fine-tooth hacksaw or a dedicated PVC mitre block to trim the profile down for a precise fit.
Ensure the angle is centered correctly; if the gap exceeds the coverage of the 50mm profile, a wider trim variant may be required.
To install, ensure the surface is clean, dry, and free from dust or grease. Measure the length required and cut the profile using a fine-tooth saw. For fixing, apply a high-quality silicone sealant, grab adhesive, or superglue along the inner faces of the angle. Press firmly onto the corner and hold in place until the adhesive sets. For care, simply wipe down with a damp cloth; avoid harsh abrasive cleaners or solvent-based chemicals that could dull the PVC finish.
