Lamson Litespeed LSF Fresh Fly Reel - Waterworks Lamson - LSF

The LSF is typically designed for freshwater fishing and works well with lines ranging from 3-8 weight, depending on the specific model.

The LSF uses a click-stop drag knob. Turn the knob clockwise to increase drag and counterclockwise to decrease drag. The fine adjustments are most noticeable at the lighter end of the drag range.

While the LSF is durable, it is primarily designed for freshwater use. Prolonged exposure to saltwater may accelerate corrosion. Rinse thoroughly after saltwater use.

Rinse the reel with fresh water after each use. Use a soft cloth to wipe the reel clean and remove any dirt or debris. Avoid using harsh chemicals or solvents.

Dacron backing is recommended. The amount of backing will depend on the line weight and the arbor size of the reel.

Waterworks-Lamson offers a limited lifetime warranty against defects in materials and workmanship.

Yes, this is normal. The click indicates that the reel is retrieving the line and is part of the design.

Lubricate the reel as needed, usually before and after the fishing season. Consult the reel's manual for specific lubrication instructions.

Disassemble the drag system (refer to the reel's manual) and clean it, removing any debris. Re-lubricate the drag washers with a reel-specific lubricant.

Check for any obstructions, like dirt or sand, between the spool and the frame. Clean the reel thoroughly and ensure all moving parts are properly lubricated.

Ensure you are using the correct line weight and that the line is not tangled around the spool. Also, check for any obstructions in the reel's mechanism.